Series 3000 Synthetic 5W-30 Heavy-Duty Diesel Oil (HDD) Package sizes include:
|
PRODUCT DESCRIPTION
AMSOIL Series 3000 100% Synthetic 5W-30 Heavy Duty Diesel
Oil (HDD) delivers extraordinary lubrication in both diesel and
gasoline engines found in commercial, fleet and personal vehicles.
By combining the industry’s premier synthetic technology with AMSOIL
premium additives, AMSOIL Series 3000 exceeds the higher performance
demands of modern engines. It withstands the stress of higher heat,
higher acid levels and excessive soot-loading found in EGR-equipped
engines. AMSOIL Series 3000 Synthetic 5W-30 Heavy Duty Diesel Oil
consistently outperforms conventional and synthetic diesel oils for
long-lasting performance and protection.
AMSOIL, the leader in automotive synthetic lubrication, produced the world’s first API qualified synthetic motor oil in 1972. Trust the extensive experience of AMSOIL The First in Synthetics® to do the best job protecting your engine.
Extends Drain Intervals
AMSOIL Series 3000 Synthetic 5W-30 Heavy Duty Diesel Oil can extend
drain intervals far beyond those recommended for conventional oils.
Its unique synthetic formulation and long-drain additive system
deliver maximum engine protection, cleanliness and performance over
extended drain intervals, reducing vehicle maintenance and waste oil
disposal costs.
Maximizes Fuel Economy
AMSOIL Synthetic 5W-30 Heavy Duty Diesel Oil is energy efficient for
reduced fuel costs. Its low viscosity minimizes “drag” associated
with high-viscosity oils, allowing the engine to operate more
freely, maximizing power and fuel economy.
Maximum Protection Against Engine Wear
Even under high temperatures and pressures, AMSOIL Series 3000
Diesel Oil’s superior film strength and anti-wear additives help
prevent metal-to-metal contact. AMSOIL Series 3000 reduces ring
wear, cylinder bore polishing, oil consumption and valve train wear
for improved engine life and lower maintenance costs.
Controls Soot Thickening and Wear
AMSOIL Synthetic 5W-30 Heavy Duty Diesel Oil is heavily fortified
with detergent/dispersant additives and is naturally resistant to
soot. It is designed to keep soot particles suspended independently
and prevent them from attaching together to form larger,
wear-causing particles. Viscosity increase is minimized and
soot-related wear is controlled.
Reduces Oil Consumption and Emissions
AMSOIL Series 3000 loses only 7.6% of its mass to high-temperature
volatility (evaporation) in the NOACK test, outperforming all
conventional oils. Because less oil vapor passes into the combustion
chamber, oil consumption and emissions are reduced. Additionally,
lower volatility helps AMSOIL 5W-30 Diesel Oil retain its viscosity
after high-temperature service for continued dependable protection
and excellent fuel economy.
Excels in Extreme Temperatures
AMSOIL Series 3000 Synthetic 5W-30 Heavy Duty Diesel Oil resists
thermal (heat) breakdown, oxidation and sludge formation better than
conventional oils. And unlike conventional petroleum oils, AMSOIL
HDD contains no wax. It stays fluid down to -50°C (-58°F) for
improved cold-temperature oil flow, reduced bearing wear and easier
starting.
APPLICATIONS
AMSOIL Synthetic 5W-30 Heavy Duty Diesel Oil is recommended for
diesel engines, gasoline engines and other applications that require
any of the following worldwide specifications:
• API CI-4+, CF, SL • ACEA A3/B3, E2 • Global DHD-1 • JASO DH-1 • Mack EO-M+, EO-N Premium Plus ’03 • DDC Power Guard 93K214 • Caterpillar ECF-1-a, ECF-2 • Cummins CES 20071, 20072, 20076, 20077, 20078 • Volvo VDS-2, VDS-3 • MB 228.1, 228.3, 229.1 • MAN 271/3275 • MTU Type 2
MIXING AMSOIL
AMSOIL Series 3000 Synthetic 5W-30 Heavy Duty Diesel Oil is
compatible with conventional and synthetic motor oils. Mixing AMSOIL
motor oils with other oils, however, will shorten the oil life
expectancy and reduce the performance benefits. AMSOIL does not
support extended drain intervals where oils have been mixed.
Aftermarket oil additives are not recommended for use with AMSOIL motor oils.
SERVICE LIFE
AMSOIL Synthetic 5W-30 Heavy Duty Diesel Oil (HDD) is
recommended for extended drain intervals in engines that are
unmodified and in good operating condition.
Diesel Engine Service
Gasoline Engine Service
*Operating conditions and drain intervals for severe and normal service are defined by the OEM. Refer to your owner’s manual.
Note: Extended drain intervals are not recommended when using biofuels containing >10% ethanol or 5% biodiesel (B5). Follow OEM drain intervals or extend drain intervals with oil analysis.
AMSOIL Ea and Donaldson Endurance full flow oil filters are designed for extended drain intervals. They stop smaller particles, have less restriction and last longer than regular filters. For best performance, use AMSOIL Ea or Donaldson Endurance oil filters.
AMSOIL Ea By-Pass Oil Filters are specialized for the removal of small, wear-causing dirt particles, thereby extending engine life. AMSOIL encourages using an AMSOIL Ea By-Pass Filtration System for maximum engine and oil life.
Oil Analyzers Inc. (715-395-0222) is a division of AMSOIL that provides cost-effective, quality oil analysis services.
Health & Safety
This product is not expected to cause health concerns when used for
the intended application and according to the recommendations in the
Material Safety Data Sheet (MSDS). An MSDS is available upon request
at 715-392-7101 or simply
click here for a PDF version. Keep Out of Reach of Children.
Don’t pollute. Return used oil to collection centers.
TYPICAL TECHNICAL PROPERTIES |
|
AMSOIL Series 3000 Synthetic 5W-30 Heavy-Duty Diesel Oil (HDD) |
|
Kinematic Viscosity @ 100°C, cSt (ASTM D-445) |
11.7 |
Kinematic Viscosity @ 40°C, cSt (ASTM D-445) |
67.8 |
Viscosity Index (ASTM D-2270) |
169 |
Cold Crank Simulator Apparent Viscosity @ -30°C, cP (ASTM D-5293) |
5276 |
Pour Point °C (°F) (ASTM D-97) |
-50 (-58) |
Flash Point °C (°F) (ASTM D-92) |
226 (439) |
Fire Point °C (°F) (ASTM D-92) |
244 (471) |
Noack Volatility (DIN 51581) 250°C
for 1 hour, % weight loss
|
7.6 |
High Temperature/High Shear
Viscosity, cP, 150°C, 1.0 x 106 s-1
(ASTM D-5481)
|
3.5 |
Four-Ball Wear Test (ASTM D-4172:
40kg, 75°C, 1200 rpm, 1 hr) Scar diameter, mm
|
0.35 |
Total Base Number |
12.1 |
Request a FREE 48 page Amsoil Catalog. NO obligation. Save money with
extended drain intervals and increased fuel economy.
REQUEST A FREE CATALOG NOW!
Vehicle lookup; look up your vechicle and find all lubricants, Trico
wipers, filters, fluid capacities and more for your specific
vechicle.
LOOK UP YOUR VEHICLE NOW!
Request information on becoming an Amsoil Dealer. Start your own
business, be your own boss and work your own hours.
REQUEST INFORMATION ON BECOMING AN AMSOIL DEALER NOW!
AMSOIL Preferred Customers purchase AMSOIL
products at wholesale cost, which is 20-25% less than regular retail
prices. Preferred Customers receive an information kit on AMSOIL
products and the monthly AMSOIL magazine. Preferred Customer
memberships may be renewed indefinitely for only $20/year, or $10.00
for 6 months.
BECOME A PREFERRED CUSTOMER NOW!
Contact us with feedback, questions, or requests. We can mail literature, catalogs, or answer questions. Contact SyntheticOilHQ to ask a question.