Home » Articles posted by jl (Page 9)

Testimonial for Amsoil Synthetic Motorcycle 20W-50

Synthetic Motorcycle 20W-50

This is a reprint of a testimonial sent to Amsoil Corporate. – editor

Hello,

Synthetic Motorcycle 20W-50

Synthetic Motorcycle 20W-50

You’ll notice by my signature below that I am an employee of Chevron Global Lubricants. I am a training specialist and field engineer for our North American lubricants division. I originally worked for Amoco at the R&D facility before moving into marketing, and while in that role, Chevron bought our lubricants business right after I moved to Florida.

All in all, I have more than 34 years of experience in fuels and lubricants testing, development and tech service support.

I own three motorcycles that I either drive on the street or race. What I wanted to share with you today is my experience with my drag bike.

It is a Yamaha Roadstar Warrior. Originally built as a power cruiser, but now it is stretched, slammed and built to run on E-85 fuel and nitrous oxide. I have taken this bike from a fun street cruiser to a beast that wants to jump out from under me every time I snap the throttle.

Synthetic Motorcycle 20W-50

The engine is putting out more than three times the horsepower it was originally built with, and with the highly oxygenated fuel, nitrous, and severe use, I have been battling cylinder and piston ring distress for a couple of years. Essentially, whenever I did a teardown, there was evidence of streaking of the Nikasil-lined aluminum cylinder, essentially a scuffing situation that is aggravated by the high cylinder pressures and fuel dilution. Synthetic Motorcycle 20W-50

Since Chevron does not make motorcycle oils, I have had to try many of the “other” different motor oils, all synthetic. To make a long story short, I should have read your white paper on motorcycle oil testing. It would have saved me at least three premature teardowns. Synthetic Motorcycle 20W-50

Synthetic Motorcycle 20W-50

Bottom line — the AMSOIL Synthetic Motorcycle 20W-50 has completely solved my problems. I have been running it for over a year now, and compression and leakdown have stayed at the exact level as when the engine was freshly rebuilt. This weekend, I tore down the top end to try a new piston ring combination, and the cylinders had absolutely NO sign of streaking or other wear-related distress. Synthetic Motorcycle 20W-50

Also, all other clearances, including valve lash and valve guide and bearing have stayed the same. This is truly remarkable.

In my training endeavors, I run into a lot of end users who are high performance junkies just like me. I have no problem sharing my experience with the AMSOIL products.

Thank you so much for the great product.

Best Regards,
Sam Vallas
Training Specialist
Chevron Global Lubricants

Free Amsoil Catalog

non-toxic antifreeze

WordPress Tags: Testimonial,Amsoil,Synthetic,Motorcycle,engine,times,cylinder,Nikasil,situation,dilution,Chevron,paper,Bottom,problems,compression,combination,Also,valve,cylinders,three,piston

Share
Posted on December 11, 2011 by , 1 comment

Family Handyman Magazine Gets it Right on Synthetic Oil Myths – almost : Amsoil Engine Flush.

Amsoil Engine Flush

Family Handyman magazine

Family Handyman Magazine had a short tip on the 4 Big Synthetic Oil Myths. www.familyhandyman.com

The big four myths listed were;

  1. You have to flush the engine before you can run synthetic oil in it. FALSE. You should NEVER flush your engine. All carmakers warn against this practice. (editorial comment; this is the one reaction we disagree with)
  2. Synthetic oil causes leaks. FALSE. This was true 25 years ago. Not anymore. Current formulations contain seal conditioners to prevent leaks.
  3. Once you switch to synthetic, you can’t go back to regular oil. FALSE. No truth whatsoever to this one.
  4. Since synthetic oil flows better when cold, I can ignore the manufacturer’s recommendations for 5W- 20 and use 10W-30. FALSE. Heavier weight oil reduces fuel efficiency and can mess up valve timing mechanisms. Stick with the manufacturer’s oil weight recommendations.

Amsoil Engine Flush

In general, Family Handyman gets it straight on these tips. These have each been a long standing myth so it’s good to get a major magazine to clear the air. We agree with their reaction to tips 2,3, and 4.

Engine Flush

Amsoil has sold an engine flush product for years. In many cases, it’s not needed. However, in certain cases it’s a proper product to use to transition a car to synthetic oil. It’s been used in thousands of vehicles by thousands of Amsoil customers with no issues.

Amsoil Engine Flush

Amsoil Engine Flush AMSOIL Engine and Transmission Flush (FLSH) helps restore fuel economy, increase operating efficiency and reduce emissions in gasoline and diesel engines, and automatic transmissions. Its potent, detergent-based formula cleans sludge and deposit build-up, promoting lower operating temperatures and reduced oil consumption. AMSOIL Engine and Transmission Flush is safe on parts and can be easily disposed of with waste oil. Amsoil Engine Flush

Restores Vehicles to Like-New
New engines and transmissions run more efficiently, but over time they gather harmful deposits that cause power and performance loss. Stop-and-go driving, prolonged idling, short trips that do not allow the engine to reach full operating temperature, towing, the ingestion of airborne dirt, fuel dilution, water condensation and oxidized oil all can promote sludge build-up in motor oil and transmission fluid. As it settles, sludge clogs narrow oil passages, restricting oil flow to vital parts, especially the upper valve train area. Amsoil Engine Flush

In transmissions, deposits can form on clutch plates, causing hesitation and erratic shifting. Ultimately clutch glazing can set in, reducing the life of the transmission. Deposits in engines and transmissions can accelerate wear, causing power loss and increased fuel consumption. Amsoil Engine Flush

• Cleans engines and transmissions for improved efficiency, fuel economy and lower emissions
• Prolongs equipment life
• Detergent-based formula more environmentally friendly
• Compatible with seals and gaskets
• One-treatment results
• Easily disposed of with waste oil

Installing new oil or transmission fluid into a dirty vehicle may not be enough to remove deposits and increase efficiency. The detergents and dispersants in some lubricants may not be able to handle leftover sludge and deposits, and the new lubricant soon becomes unfit for service, accelerating the formation of even more harmful deposits. Amsoil Engine Flush

AMSOIL Engine and Transmission Flush Benefits
Unlike many flush products, AMSOIL Engine and Transmission Flush features a multi-use formulation that dissolves and disperses sludge, varnish and deposits in both engines and automatic transmissions. Due to its detergent-based formulation, used AMSOIL FLSH can be easily disposed of with waste oil, making it more user-friendly. Its advanced formula of light base oil technology, powerful detergents and dispersants provides safe cleaning action. AMSOIL FLSH is compatible with both petroleum and synthetic oils, preparing poorly maintained equipment for installation of new oil. It represents the first step toward restoring neglected equipment to top-notch performance. AMSOIL Engine and Transmission Flush provides the following benefits in only one treatment:

Gasoline and Diesel Engines

• Helps loosen sticky valves and rings, minimizing blow-by and reducing emissions
• Helps quiet lifter noise
• Promotes lower operating temperatures through sludge removal
• Easy disposal

Automatic Transmissions

• Cleans deposits in oil cooler and ports
• Helps unclog fluid passages
• Cleans deposits and varnish from clutch plates, helping improve efficiency
• Promotes smoother operation and transmission life through reduced shift delay

Applications
AMSOIL Engine and Transmission Flush is recommended for diesel and gasoline engines, and automatic transmissions. It is not recommended for CVT transmissions or differentials.

Directions for Use
Though it works in one treatment, AMSOIL Engine and Transmission Flush is safe enough to be used at every oil change. If using a flushing machine, follow the manufacturer’s recommendation. Otherwise, use the following guidelines:

Engine: Add 16 oz. bottle of AMSOIL Engine and Transmission Flush to engine oil fill port. Idle the engine for 10-15 minutes, then immediately drain the oil. Ensure enough time for the system to completely
drain. Remove and replace the engine oil filter. Refill engine with new engine oil in the viscosity grade recommended by the manufacturer.

Transmission: Engage emergency brake. Add 16 oz. bottle of AMSOIL Engine Flush to transmission oil fill port. Idle for 10-15 minutes; shift through drive and reverse. Do NOT place vehicle under heavy load. Drain entire transmission and torque converter of fluid. FILTER MUST BE CHANGED prior to refilling with new transmission fluid.

NOTE: It is not recommended to flush transmissions that do not have a removable pan or access to the transmission filter.

 

Amsoil Engine Flush

Amsoil Engine Flush

 

 

 

 

 

 

 

(above) Automatic transmission clutch plates pre-cleanup. Varnish and glazing is heavy on some of the plates.

Amsoil Engine Flush

Amsoil Engine Flush

 

 

 

 

 

 

 

(above) Automatic transmission clutch plates after cleanup with AMSOIL Engine Flush reveal lighter glazing and varnish.

Amsoil Engine Flush

Amsoil Engine Flush

 

 

 

 

 

 

 

(above) Cylinder head pre-cleanup. Note the sludge deposits on and around the valve springs and push rod openings.

Amsoil Engine Flush

Amsoil Engine Flush

 

 

 

 

 

 

 

(above) Cylinder head after cleanup with AMSOIL Engine Flush. The valve springs and push rod openings are noticeably cleaner, with fewer sludge deposits. The manufacturer’s stamping is more easily seen.

http://www.syntheticoilhq.com

Diesel fuel treatment

WordPress Tags: Handyman,Magazine,Synthetic,Myths,engine,FALSE,editorial,reaction,Current,Once,truth,manufacturer,Heavier,efficiency,valve,Stick,tips,myth,Flush,Amsoil,product,cases,transition,customers,Transmission,FLSH,gasoline,formula,sludge,consumption,performance,Stop,temperature,ingestion,dirt,dilution,condensation,area,plates,hesitation,life,equipment,Detergent,Compatible,treatment,results,vehicle,lubricant,formation,Benefits,products,features,user,technology,action,petroleum,installation,Diesel,Engines,rings,lifter,noise,removal,Easy,disposal,Automatic,operation,Directions,Though,machine,recommendation,Otherwise,guidelines,bottle,port,Idle,Ensure,system,Remove,Refill,Engage,emergency,Drain,FILTER,NOTE,cleanup,Varnish,Cylinder,recommendations,mechanisms,vehicles,emissions,transmissions,temperatures,ports,differentials,thousands,detergents,dispersants,formulation

Share
Posted on December 9, 2011 by , 2 comments

Non-Toxic Antifreeze–Don’t Kill your Dog :- Non toxic antifreeze.

Non toxic antifreeze

Free synthetic oil catalog

BuyNow3 Buy Amsoil Non toxic antifreeze now!

AMSOIL Antifreeze and Engine Coolant (ANT)

Non toxic antifreeze is not nearly as dangerous for your pets. Normal antifreeze contains ethylene glycol which is extremely toxic and poisonous. Normal antifreeze is also sweet, so pets often are tempted to drink it. Amsoil propylene glycol is non-toxic and biodegradable. Save your pets!

Product Description
AMSOIL Antifreeze & Coolant (ANT) Non toxic antifreeze is formulated to provide benefits far beyond those found in today’s conventional antifreeze and coolant products. This revolutionary formulation provides maximum antifreeze and cooling protection in the most extreme temperatures and operating conditions. And unlike conventional ethylene glycol-based products, which are highly toxic and even fatal, AMSOIL Antifreeze & Coolant is formulated with propylene glycol. It is biodegradable and its low toxicity limits the threat to children, pets and wildlife. WordPress Tags: Toxic,Antifreeze,Kill,AMSOIL,Coolant,benefits,products,protection,threat,children,wildlife,temperatures,glycol

Non toxic antifreeze

AMSOIL Antifreeze & Coolant provides even greater benefits:

Lasts Longer
AMSOIL Antifreeze & Coolant (Non toxic antifreeze) contains a proprietary poly organic acid technology. It eliminates the need for supplemental coolant additives and recharging cooling systems. AMSOIL Antifreeze & Coolant provides extended service life in all gasoline and diesel vehicles. It can be used for seven years or 250,000 miles in passenger cars, light-duty trucks, vans and recreational vehicles. It lasts seven years or 750,000 miles in over-the-road diesel trucks. Also for motorcycles, ATVs, snowmobiles and closed marine applications. AMSOIL Antifreeze and Engine Coolant lasts longer than conventional products.

Compatible With Other Fluids
AMSOIL Antifreeze & Coolant is dyed neutral yellow and is compatible with all ethylene and propylene antifreeze and coolant formulations on the market, including DEX-Cool®, Sierra® and Zerex®. It is also compatible with fully formulated diesel anti-freezes and other organic acid technology (OAT) and hybrid organic acid technology (HOAT) formulations.

Stops Leaks
AMSOIL Antifreeze & Coolant adheres to metal. It self-seals hairline cracks in welds and seams to prevent leaks, without additional stop-leak products or fibrous materials.

Helps Prevent Metallic Corrosion
Independent tests reveal AMSOIL Antifreeze & Engine Coolant surpassed standards for metallic corrosion. It plates metal to protect even when exposed to acids and salt spray. Standard allowances for loss in aluminum and solder are less than 60 mg. AMSOIL Antifreeze & Engine Coolant lost 0 mg in aluminum and less than 6 mg in solder.

Standards for iron, steel, copper and brass allow a maximum loss of less than 20 mg. AMSOIL Antifreeze & Engine Coolant never exceeded a 3 mg loss in any of those metals in a testing period that was run for 10 weeks, three weeks longer than required tests.

Non toxic antifreeze

AMSOIL Antifreeze & Engine Coolant (ANT)

• Formulated for heavy-duty and automotive applications
• Good for motorcycles, ATVs, snowmobiles and some marine applications
• Extended drain intervals

Up to seven years or 750,000 miles in Class 8 vehicles
Up to seven years or 250,000 miles in pleasure vehicles

• Universal compatibility
• Safe, biodegradable, non-toxic, non-polluting
• Aluminum engine block compatible
• Silicate- and Phosphate-Free

AMSOIL Antifreeze & Engine Coolant meets the following automotive and heavy-duty service specifications:

• ASTM D-6210 • ASTM D-3306
• ASTM D 6210-98

Composition by Weight:
Total glycols, > 92 percent;
Corrosion inhibitors and antifoamants,
= 3 percent; Water, < 5 percent

Boiling Point (sea level):
219° F at 40 percent concentration,
222° F at 50 percent,
225° F at 60 percent;
increase by 40° to 45° F if a 15 psi
radiator cap is used

Click on graph images to see larger views

Non toxic antifreeze

 

 

 

 

 

 

/blog/synthetic-compressor-oil/

WordPress Tags: Toxic,Antifreeze,Kill,AMSOIL,Coolant,benefits,products,protection,threat,children,wildlife,temperatures,glycol

Share
Posted on December 9, 2011 by , 2 comments

Why is my Engine Oil Low?

Why is my Engine Oil Low?

FREE Amsoil Catalog

Why is my engine oil low?

Why is my engine oil low?

 

Why is my engine oil low? There are several main causes of engine oil use. Not are all related to engine oil use. Some folks think it’s related to extended drain intervals, and use of synthetics. The real reason for asking Why is my engine oil low? is much more simple. Let’s look at the reasons.

Why is my engine oil low? Leaking

There are essentially two main reasons for low oil levels. Leaking is one. At one time or another we’ve all had a car that left drips on the garage floor. In an early 2010 column I addressed in the issue of motor oil consumption, with a focus on the variety of ways oil leaks from an engine. At that time I wrote, “Some of the many points where oil leaks may occur include oil lines, crankcase drain plugs, oil pan gaskets, valve cover gaskets, oil pump gaskets, fuel pump gaskets, timing case covers and camshaft bearing seals. No possible source of leakage should be neglected because even a very small leak can cause extremely high oil consumption. For example, it has been estimated that a leak of one drop of oil every 20 feet is approximately equal to a loss of one quart of oil every 100 miles.” Why is my engine oil low?

 

Why is my Engine Oil Low?

Why is my Engine Oil Low? Volatility

Volatization is a term used to describe what happens to a fluid when it is heated to the point it begins to “boil off.” Upon reaching a certain temperature, oil will begin to lose some of its lighter weight molecules as they vaporize and leave heavier weight molecules behind. Not only does this cause higher oil consumption, it causes increased viscosity, making the oil more difficult to circulate through the lubrication system. The thicker oil left behind after volatization contributes to damaging deposits, sticky piston rings and oil blow-by, all of which contribute to reduced engine life, reduced fuel economy and increased air pollution. Why is my engine oil low?

At one time it was not uncommon for typical conventional oils to experience 20-30 percent boil-off in the NOACK Volatility Test. Today’s API standard for SM and SN oils is 15 percent, putting greater demands on oil manufacturers. Premium synthetic oils are significantly more resistant to these effects, with some of the best in the 4.5 to 6 percent range. Why is my engine oil low?

Why is my Engine Oil Low?

Why is my Engine Oil Low? –Neglect
We live in an age in which we’re inundated with information. Even the most basic devices have become so complex one hardly knows how to operate them without elaborate user guides. Remember how simple a telephone used to be? Cars, too, have become similarly complex. Even Legos have gone robotic.

Electronic sensors, brain boxes and an assortment of wires and hoses can make it difficult for the untrained to figure out where to check their fluid levels even if they were intending to. In short, cars are complex, and a lot of young people have never been trained in the maintenance basics many of us learned when we got our own first set of wheels.

This is not meant to be an excuse or apology for such neglect. It just amplifies the need to train motorists in the simple basics of vehicle maintenance. Taking a minute to teach car owners how to check their oil is a form of empowerment. Cars aren’t cheap and people need to learn these essential maintenance matters. In these cases, the solution is not more frequent oil changes, but rather education. If a car is a real oil burner, even three months is too long. Motorists need to know how to take a reading with the dipstick and top off when needed.

 

amsoil_synthetic_oil

Why is my engine oil low?

Conclusions
Any lube operator who thought it was hot in Dallas this summer knows it’s three times hotter inside an engine and the volatility of conventional oils even if improved since the old days is an issue. A mechanically sound engine will still need a top off now and then. That’s why it is our jobs as professionals to teach our customers how to find the dipstick and periodically take a reading. Furthermore, we do our customers a disservice by not recommending premium synthetic oils to those who have mechanically sound engines because of their greater resistance to boil-off and thickening.

Amsoil Signature Series

Share
Posted on December 9, 2011 by , 4 comments
First « 7891011 » Last