Home » Archive by category "Opportunity"

Tip One : Lubricating In All Of The Right Places ( And Not One Of The Wrong Places – Amsoil Dominator.

Having spent a few years in technical support with a corporation that sells manual transmissions, I have talked with lots of purchasers that have made clutch installation mistakes that cost them dearly re time, money and disappointment. These tips are based primarily on my past experience with what's often neglected by an amateur that's installing a new clutch. Wipe a light coat of oil on the input shaft splines to stop rust. This manuscript isn't a replacement for a good car repair manual that is restricted to the auto you are working on! Tip one : Oiling in all of the right places ( and not one of the wrong places ) – Place a light coat of grease on the pilot end of the input shaft and on the collar the release bearing slides on. Dodge will be promoting the auto far beyond North America in DCX’s search to spread the Dodge brand across the world. Watch out to NOT get any grease on the flywheel, the clutch disk, or the pressure plate.

Still, a Mexican built Scion like ‘Hornet’ will possibly become the junior level automobile within just a few years as DCX gets ready to take on Scion and the approaching cost-effectively priced Chinese vehicles. Yes, VW is turning to its German rival to fill a void in its line up. Not too much needs to be done by VW to get ready for the vehicle’s arrival as it is going to be a rebadged version of Chrysler’s successful minivans, the Caravan and City amp, Country. He also indicated to me that there also are firms which have come in and employed the water in a bad way, as he explained, ‘Car Washing by unknown outsiders ‘Privately hired’ they consume more water and make the space around unclean and un hygienic. Instead he plans on making another Green Vehicle Wash business over there, so I asked him, what type of ‘Green Automobile Wash’ are you planning in Dubai, My opinion is that water is dear there, so how are you handling that issue? You see, there are several folks using dry-wash type products in Dubai to wash automobiles. Maybe this worked example has value to those considering the correct way to run auto-repair and upkeep companies in other markets and in other states. There are paths to do it properly without those issues, and it's extremely smart of him to see this potential opportunity. The invention never stops in racing, and the contest is what propels it. Fortunately, if you're a writer who likes to draft on engaging and challenging subjects, you almost certainly will not find a better subject to put down some thoughts about than auto racing. They examined the auto racing mags, and they are going online and search auto racing, they are on the lookout for articles and fascinating stories, they are looking out for something new, something they do not know.

Intriguingly enough, auto racing is massive business, and the fans have a neverending thirst for info, stories, and written material. If this sounds a bit like something you would like to write about, I will assure you there are mag editors happy to pay you $.25 a word or even more for glorious stories and colourful digital footage to go with them. This is particularly useful if you're in a rush. Ensure they're with a trusty company and they can supply identification before you permit them access to your running auto. You should generally consider the locksmith references before doing select. As an example if you're in a dangerous situation or under dangerous conditions, a locksmith may counsel you to the authorities. If you happen to have got a tiny kid in the automobile during extraordinary heat, it could be better to have the police come to your help.

Share
Posted on February 3, 2012 by , 8 comments

Motley Crue’s Vince Neil To Go To A.D. Farrow Company. Harley-Davidson The Store At NorthStar

<!–ACNTP

M246;tley Cr252;e’s Vince Neil to visit A.D. Farrow Co. Harley-Davidson the Store at NorthStar. M246;tley Cr252;e’s Vince Neil will visit A.D. Farrow Corp.

Harley-Davidson the Shop at NorthStar. Neil’s visit will take place from 4:00pm to 6:00pm on Tues., Aug 2. As a continuing of A.D. Farrow Company’s efforts to provide great entertainment to its shoppers, in addition to supporting the community, they’re happy to host Vince Neil for a “Rock the Shop” meet and greet that will include photograph opportunities, as well as an autograph session.

A.D. Farrow Company. Has just hosted Dierks Bentley’s Miles and Music for Kids Event, which generated over $125,000 for Nationwide Children’s Infirmary.

More recently, A.D. Farrow Company. Hosted the Ohio Fallen Heroes Ride and Rally. The Rally also generated tens of thousands for the advantage of the Ohio Fallen Heroes Commemorative to honor those who have died in the war on terror.

In addition to these community outreach events the A.D. Farrow Corp. Family of agencies hosts Super Saturdays every Saturday, to provide live entertainment every weekend.

A.D. Farrow Company. Harley-Davidson customers and riders all across Ohio are invited to meet legendary singer Vince Neil at America’s Oldest Harley Dealer from 4:00pm to 6:00pm on August two. Motley Crue, Poison, and New York Dolls will be performing live in central Columbus at the Schottenstein Center starting with a pre party at 5:00pm, concert at 7:00pm, and an after party at Slapsy Maxie’s. A.D. Farrow Corp.

Is content to have partnered with Motley Crue in order to prepare that a little of ticket sales will be advantageous to the Ohio Fallen Heroes Memorial.

ACNTPEND–>

Share
Posted on January 23, 2012 by , Reply

Synthetic Compressor Oil

Synthetic Compressor Oil – eliminate maintenance on compressors

Free Amsoil Catalog

synthetic compressor oil Buy Amsoil Synthetic Compressor Oil now!

Synthetic compressor oil can eliminate one maintenance chore in your shop. Most folks never change the compressor fluid in shop air compressors. These are often neglected, but critical tools in a shop. You can eliminate the need to maintain and monitor oil changes in compressors by installing synthetic compressor oil. AMSOIL PC Series Synthetic Compressor Oil is a long-life, premium compressor lubricant based on novel, proprietary technology. It incorporates the highest quality, thermally stable PAO synthetics fortified with premium non-detergent, ashless additives for maximum protection at high temperatures and pressures. It lasts up to eight times longer than petroleum oils, effectively reducing maintenance and waste oil disposal costs.

Improves Compressor Efficiency
AMSOIL PC Series Synthetic Compressor Oil has low friction properties and resists viscosity increase from oxidation. It helps improve operating efficiency and saves money on electrical energy consumption.

Synthetic Compressor Oil

synthetic compressor oilControls Foam and Reduces Wear
AMSOIL PC Series Synthetic Compressor Oil contains anti-foam additives and, unlike some other compressor oils, is anti-wear fortified. Good foam control reduces heat, oxidation and wear. High contact regions are protected against wear for increased compressor life and efficiency.

Resists Water Contamination
Water from condensation builds up in compressors and can cause unwanted oil/water emulsions, environmental discharge hazards and rust. AMSOIL PC Series Synthetic Compressor Oil is hydrolytically stable. It resists acid formation, readily separates from water and is anti-rust fortified. Water can be easily drained for simplified environmental discharge and increased oil life.

Resists Heat and Oxidation
AMSOIL PC Series Oil combines the inherent stability of premium synthetic base oils with specialized anti-oxidant additives to resist varnish, carbon and acid formation. It is formulated to protect compressors better and last longer in service than petroleum oils, especially during hot operating conditions.

Synthetic Compressor Oil

Safety Advantage
AMSOIL PC Series Oil is an ashless, high-flash-point formulation with very low carbon-forming tendencies that minimizes the incidence of ignition-promoting “hot spots.” While PC Series Oil can provide improved fire safety, it cannot be considered non-flammable.

Application Recommendation
AMSOIL PC Series Oil in the appropriate viscosity is recommended for use in single and multistage rotary screw, vane, centrifugal and reciprocating compressor crankcases and cylinders, vacuum pumps and other applications such as gears, bearings, blowers, pumps and handheld pneumatic tools. In compressor applications, drain intervals of 8,000 hours or more can be expected under normal operation. Drain intervals are subject to operating conditions and maintenance practices. Monitoring by oil analysis is recommended. For best performance when converting to AMSOIL PC Series Synthetic Compressor Oil, it is recommended the compressor be drained of the old fluid prior to the installation of PC Series Oil. If carbon deposits are present on the internal components, it is recommended they be removed following the compressor manufacturer recommendations.

How to change the air compressor oil

Some air compressors are oil less; they do NOT use oil. If you have one of those, you don’t have to change oil since there isn’t any. Most large shop style tower compressors ARE oil lubricated.

  • Do NOT use regular automotive oil; this is against almost all manufacturer recommendations. Read your manual.
  • Determine the weight and spec recommended.
  • There will usually be a drain and a filler/dipstick.
  • Drain the oil, and put the plug back in.
  • Fill the oil to the level recommended on the dipstick, or on the oil sight glass.
  • Most manufacturers (including CH) recommend changing once after the first hour of use.

  • Synthetic Compressor Oil

    Synthetic Compressor Oil

Here is a detail of how to read the oil sight glass;

Synthetic Compressor Oil

Synthetic Compressor Oil

 

COMPATIBILITY
AMSOIL PC Series Synthetic Compressor Oil is compatible with petroleum oils and most synthetic oils, seals, paints and materials, including the following:

Gases:

• Nitrogen • Hydrogen • Helium • Carbon Monoxide
• Carbon Dioxide (dry) • Ethylene • Methane
• Propane • Butane • Propylene • Butylenes
• Natural Gas • Benzene • Butadiene
• Furnace (crack gas) • Hydrogen Sulfide (dry)
• Synthetic Gas • Sulfur Dioxide

Paints:

• Epoxy • Oil Resistant Alkyd • Acrylic Enamel

Plastics:

• Acetal (Delrin) • ABS • Phenolic • Polyamide-imide
• Polyamide (Nylon)
• Polycarbonate (metal covered only)
• Polyester • Polyetherimide (Nylon) • Polyimide
• Polyphenylene oxide • Polystyrene • Polysulfone
• PTFE (Teflon) • Terephthalate.

Elastomers:

• Fluoroelastomer (Viton) • Nitrile (Buna N)
• Polyacrylate • TFE/P • Poly Urethane.

Note: Not recommended for “breathing air” or refrigeration compressors. Not recommended for use with polycarbonate plastic that is not metal covered, PVC plastic and butyl, ethylene-propylene or SBR rubber. PC Series Synthetic Compressor Oils are Not Compatible with polyalkylene glycol or silicone oils.

Synthetic PC Series Compressor Oils SAE 10W
(PCH)
 SAE 20
(PCI)		 SAE 30
(PCJ) 		SAE 40
(PCK)		 SAE 50
(PCL)
ISO VG – ASTM D-2422 32 46 68 100 150
VK 100°C – ASTM D-445 6.2 7.3 10.9 13.6 17.9
VK 40°C – ASTM D-445 33.1 42.4 67.4 100.5 148.4
Viscosity Index – ASTM D-2270 137 137 153 136 134
SPGR – ASTM D-1298 0.8393 0.8408 0.8468 0.8550 0.8602
Density – ASTM D-1298 6.989 7.001 7.051 7.119 7.163
Flash Point °C (°F) – ASTM D-92 264 (507) 254 (489) 253 (487) 264 (507) 254 (489)
Fire Point °C (°F) – ASTM D-92 278 (532) 280 (536) 280 (536) 276 (529) 274 (525)
Pour Point °C (°F) – ASTM D-97 -53 (-63) -48 (-54) -40 (-40) -45 (-49) -42 (-44)
Four-Ball Wear Test – ASTM D-4172 (40 kg, 1200 rpm, 75° C, 60 min.) 0.45 0.45 0.45 0.45 0.45
Copper Strip Corrosion Test – ASTM D-130 1A 1A 1A 1A 1A
Rust Test – ASTM D665 A & B Fresh Water and Synthetic Sea Water Pass Pass Pass Pass Pass
Foam, ml (ASTM D-892) Sequence I, II, III Test End – and After 10 minutes settling 0/0/0 0/0/0 0/0/0 0/0/0 0/0/0
Demulsibility ASTM D-1401 [oil/water/cuff (minutes)] 40/40/0 (5) 40/40/0 (5) 40/40/0 (5) 40/40/0 (5) 40/40/0 (5)

 

WordPress Tags: Synthetic,Compressor,tools,shop,AMSOIL,Series,life,lubricant,technology,protection,times,petroleum,maintenance,disposal,temperatures

Synthetic PC Series Compressor Oils SAE 10W
(PCH)
 SAE 20
(PCI)		 SAE 30
(PCJ) 		SAE 40
(PCK)		 SAE 50
(PCL)
ISO VG – ASTM D-2422 32 46 68 100 150
VK 100°C – ASTM D-445 6.2 7.3 10.9 13.6 17.9
VK 40°C – ASTM D-445 33.1 42.4 67.4 100.5 148.4
Viscosity Index – ASTM D-2270 137 137 153 136 134
SPGR – ASTM D-1298 0.8393 0.8408 0.8468 0.8550 0.8602
Density – ASTM D-1298 6.989 7.001 7.051 7.119 7.163
Flash Point °C (°F) – ASTM D-92 264 (507) 254 (489) 253 (487) 264 (507) 254 (489)
Fire Point °C (°F) – ASTM D-92 278 (532) 280 (536) 280 (536) 276 (529) 274 (525)
Pour Point °C (°F) – ASTM D-97 -53 (-63) -48 (-54) -40 (-40) -45 (-49) -42 (-44)
Four-Ball Wear Test – ASTM D-4172 (40 kg, 1200 rpm, 75° C, 60 min.) 0.45 0.45 0.45 0.45 0.45
Copper Strip Corrosion Test – ASTM D-130 1A 1A 1A 1A 1A
Rust Test – ASTM D665 A & B Fresh Water and Synthetic Sea Water Pass Pass Pass Pass Pass
Foam, ml (ASTM D-892) Sequence I, II, III Test End – and After 10 minutes settling 0/0/0 0/0/0 0/0/0 0/0/0 0/0/0
Demulsibility ASTM D-1401 [oil/water/cuff (minutes)] 40/40/0 (5) 40/40/0 (5) 40/40/0 (5) 40/40/0 (5) 40/40/0 (5)

Share
Posted on December 9, 2011 by , 2 comments

Amsoil Income Opportunities

Earn profits through retail sales.

As an AMSOIL Dealer, you purchase AMSOIL products at wholesale cost and then sell them at the suggested retail price.
Your income starts building immediately with retail profits.
image

You also earn monthly commissions on your purchases from AMSOIL.

 
You get extra profits with AMSOIL commissions. Every AMSOIL product you purchase has a commission value, known as commission credits. At the end of each month, your total accumulated commission credits are calculated and AMSOIL sends you a check, based on the AMSOIL Commission Credit Schedule. (Minimum total monthly volume to receive a commission is 100 commission credits.)

image

Earn profits with catalog sales.

You can also sell AMSOIL products with the AMSOIL Retail Catalog Program. Catalogs (G100) can be purchased directly from AMSOIL and then distributed to potential AMSOIL customers. This can be as simple as passing out your catalogs to prospects at a car show, or other similar gathering. Your Amsoil dealer number is on the catalog, so any orders would be associated with your account. Once the catalogs are in the hands of your potential customers, any sales made will earn you retail profits and commission credits automatically. Order taking, shipping and returns all are handled by AMSOIL INC.

Earn retail profits and commission credits

with online commerce.

The AMSOIL Online Store offers customers the convenience of ordering AMSOIL products over the Internet. As in the Retail Catalog Sales Program, products are sold at suggested retail price and AMSOIL Dealers earn the retail profits and commission credits. Order taking, shipping and returns all are handled by AMSOIL INC. AMSOIL also offers website packages and other options that allow all Dealers, regardless of computer experience or equipment, to participate in Internet sales. As an IT (Information Technology) professional, I offer free domain names and website hosting to all Dealers who sign up with our group.

Commercial accounts are a great opportunity for increased sales.

Commercial accounts can provide a steady source of income for an AMSOIl Dealer. Commercial accounts are businesses which have company-owned vehicles, equipment and machinery that use the high-quality lubricants and filters available from AMSOIL. These accounts do not sell AMSOIL products, only use them in their vehicles, equipment and machinery.
When you register a commercial account, you earn a cash commission on every purchase your account makes. Each
account purchase also earns you commission credits which are applied to the commission schedule and added to your
commission totals. Product commission values are detailed in the Dealer Profit List (G3501).

Additional profits in retail markets.

Selling AMSOIL to retail accounts is another way to earn commissions. Retail accounts are retail outlets such as auto parts
stores, motorcycle dealerships and automotive service centers. These stores stock AMSOIL products to sell to their customers or install AMSOIL products as part of a service such as with oil changes. When you register a retail account, you earn a cash commission on every purchase your account makes. Each account purchase also earns you commission credits which are applied to the commission schedule and added to your commission totals. Product commission values are detailed in the Dealer Profit List (G3501).

Multiply your profits by building and

managing your own sales group.

When you sponsor new Dealers and Preferred Customers (just like you would be sponsored as a Dealer) you are building a personal group. The commission value of your group’s purchases is added to yours, increasing the percentage of your commission and giving you a bigger commission check. The primary difference between Dealers and Preferred Customers is the right to earn commissions. Dealers earn commission checks based upon their commission credits and the commission schedule. Preferred Customers purchase AMSOIL products at the same wholesale price as Dealers, but do not earn commission. All commission credits earned by Preferred Customers are credited to the sponsoring Dealer.

If you have any questions about becoming an Amsoil Dealer, please contact us using the contact form.

If you just want to stay in touch and learn more, join our FREE newsletter which come out every month or two.

Share
Posted on June 29, 2010 by , Reply

AMSOIL Preferred Customer

AMSOIL Preferred Customer

AMSOIL Preferred Customers purchase AMSOIL products at wholesale cost, without the responsibilities of owning a Dealership. This PC (Preferred Customer) account costs $10.00 per 6 months, or $20.00 for a year. This is easily recovered in savings. Savings are typically 15% to 25% off of retail, and yhou can order directly by phone or online. For example, the engine fogger is $5.85 retail, and only $4.50 for a Preferred Customer,  with similar savings on other products
Preferred Customer Memberships are recommended for people who are not necessarily interested in the business opportunity, but want the lowest possible prices on the best lubrication and filtration products for their vehicles and equipment. Preferred Customers pay the same low prices for AMSOIL products that AMSOIL Dealers pay.
Ten dollars gets you a six-month trial Preferred Customer membership for buying AMSOIL products at wholesale prices. Here is what Preferred Customers get:

  • Preferred Customers buy AMSOIL products at wholesale prices. The discount price is 15-25% less than regular retail prices. If you buy $100 of AMSOIL products a year, a Preferred Customer membership will save you money!

  • Preferred Customer memberships may be renewed indefinitely for only $20/year.

  • Preferred Customers can change the status of their membership to an AMSOIL Dealership (Change of Status Form) at any time.

  • Preferred Customers receive an information kit on AMSOIL products and the monthly AMSOIL product, racing and application magazine, the AMSOIL Action
    News.

Become an Amsoil Preferred Customer and purchase AMSOIL products at Dealer cost. If you add the 6-month or 1-year membership to your shopping cart, you can immediately add products to your shopping cart at the discounted price along with your membership. You will receive your Preferred Customer Membership pack in the mail in 7 to 10 business days. This is the best, quickest way to get low cost Amsoil quickly. By adding the Preferred Customer membership to your order, you get the lower cost on everything in the order!

Next steps to become a Preferred Customer;

Phone; To become an Amsoil Preferred Customer simply call 1-800-956-5695, and tell the phone operator you would like to become an Amsoil Preferred Customer. You will need your VISA card number handy when you call. When the operator asks for your Customer Number tell them: 313120.

Email me if you have any questions or need any help. Email me after you sign up and I’ll send you a coffee cup or something similar.

Share
Posted on June 24, 2010 by , Reply
12 » Last