Home » Archive by category "Trucks" (Page 6)

AMSOIL Monster Trucks Take Victories in Monroe and Rossburg

AMSOIL Monster Trucks Take Victories in Monroe and Rossburg

The AMSOIL Shock Therapy and Excaliber monster trucks recently competed in Monroe, Mich., where Chris Ryan drove Excaliber to the racing final, and Jon Zimmer and Shock Therapy took a big freestyle victory with big air, two-wheel saves and plenty of momentum. In Rossburg, Ohio, Zimmer drove Shock Therapy to the wheelie contest victory before taking the wheel of Excaliber for another freestyle victory with his trademark huge air, great momentum and high-speed donuts.

Share

New Dominator® Coolant Boost – water wetter

New Dominator® Coolant Boost

Effective Heat Transfer, Enhanced Corrosion Protection

Buy Dominator Coolant Boost here, for $8.35/bottle. Discounts if you are a Preferred Customer

Racers demand lower engine operating temperatures in order to achieve maximum efficiency and horsepower on the track, while the straight water coolant used by many racers opens engines up to damaging radiator and water pump corrosion. New AMSOIL Dominator® Coolant Boost (RDCB) provides racers and motorists with significantly lower engine operating temperatures, quicker engine warm-up times and advanced corrosion protection.

Dominator Coolant Boost is formulated with proprietary tiered surfactant technology, providing quick and effective heat transfer inside radiator and cylinder heads, which results in reduced operating temperatures, more efficient operation, increased horsepower and significantly reduced engine warm-up times in cold weather. Coolant Boost also contains a robust mixture of corrosion inhibitors that protect the radiator, heater core, water pump, cylinder heads, engine block and intake manifold from the damaging effects of corrosion.

Temperature Reduction Dynamometer Test

To test the temperature reduction capabilities of Dominator Coolant Boost, dyno tests were performed on a Chevy 350 cubic inch engine with an aluminum block and cylinder heads. Running the test with both straight water and water treated with Coolant Boost, the engine was operated at 4,500 rpm until coolant temperature stabilized. 
Coolant Mixture Temperature
Straight Water 221°F
Water with Coolant Boost 202°F
Test results show water treated with Coolant Boost provided a 19°F temperature reduction.

 

Aluminum Corrosion Test

The Aluminum Corrosion Test (ASTM D-4340) measures the corrosion protection properties of Dominator Coolant Boost in modern automobile and high-performance race engines with aluminum cylinder heads. A cast aluminum puck was heated to 275°F at 28 PSI and exposed to the test coolant mixture for one week. Weight loss of less than 1.0 mg is required to pass the test.

Coolant Mixture Weight Loss
Straight Water 3.97 mg/cm2/wk
Water with Coolant Boost 0.14 mg/cm2/wk
Test results show water treated with Coolant Boost easily passed the Aluminum Corrosion Test.

Metal Corrosion Test
The Metal Corrosion Test (ASTM D-2570) measures corrosion protection properties in automotive cooling systems. Using ASTM corrosive water designed to simulate hard and corrosive water in degraded coolant, six metal coupons constructed of the most common metals in automotive cooling systems were exposed to the test coolant mixture at 190°F. The coolant was maintained at a temperature and flow rate equivalent to the operating conditions seen in most passenger vehicles. Corrosive weight loss suffered during the test determines the additive’s corrosion protection properties.image 

Retail $11.10 per 16 oz Bottle

 

Racers demand lower engine operating temperatures in order to achieve maximum efficiency and horsepower on the track, while the straight water coolant used by many racers opens engines up to damaging radiator and water pump corrosion. AMSOIL Dominator® Coolant Boost (RDCB) provides racers and motorists with significantly lower engine operating temperatures, quicker engine warm-up times and advanced corrosion protection.

Dominator Coolant Boost is formulated with proprietary tiered surfactant technology, providing quick and effective heat transfer inside radiators and cylinder heads, which results in reduced operating temperatures, more efficient operation, increased horsepower and significantly reduced engine warm-up times in cold weather. Coolant Boost also contains a robust mixture of corrosion inhibitors that protect the radiator, heater core, water pump, cylinder heads, engine block and intake manifold from the damaging effects of corrosion.

Temperature Reduction Dynamometer Test
To test the temperature reduction capabilities of Dominator Coolant Boost, dyno tests were performed on a Chevy 350 cubic inch engine with an aluminum block and cylinder heads. Running the test with both straight water and water treated with Coolant Boost, the engine was operated at 4,500 rpm until coolant temperature stabilized.

COOLANT MIXTURE STABILIZED COOLANT TEMPERATURE
Straight Water
221°F
Water with Coolant Boost
202°F

Test results show water treated with Coolant Boost provided a 19°F temperature reduction.

Aluminum Corrosion Test
The Aluminum Corrosion Test (ASTM D-4340) measures the corrosion protection properties of Dominator Coolant Boost in modern automobile and high-performance race engines with aluminum cylinder heads. A cast aluminum puck was heated to 275°F at 28 PSI and exposed to the test coolant mixture for one week. Weight loss of less than 1.0 mg is required to pass the test.

COOLANT MIXTURE WEIGHT LOSS
Straight Water 3.97 mg/cm2/wk
Water with Coolant Boost 0.14 mg/cm2/wk

Test results show water treated with Coolant Boost easily passed the Aluminum Corrosion Test.

Metal Corrosion Test
The Metal Corrosion Test (ASTM D-2570) measures corrosion protection properties in automotive cooling systems. Using ASTM corrosive water designed to simulate hard and corrosive water in degraded coolant, six metal coupons constructed of the most common metals in automotive cooling systems were exposed to the test coolant mixture at 190°F. The coolant was maintained at a temperature and flow rate equivalent to the operating conditions seen in most passenger vehicles. Corrosive weight loss suffered during the test determines the additive’s corrosion protection properties.

METAL STRAIGHT WATER
WEIGHT LOSS
WATER WITH COOLANT BOOST
WEIGHT LOSS
Copper 66mg 7mg
Solder 120mg 0mg
Brass 59mg 3mg
Steel 54mg 0mg
Cast Iron 117mg 0mg
Cast Aluminum 89mg 0mg

Test results show water treated with Coolant Boost significantly reduced weight loss due to corrosion.

Recommendations
Dominator Coolant Boost is recommended with both racing applications using straight water coolant and automotive applications using 50/50 coolant/water mixtures.

Directions: With engine off and cool, make sure cooling system is filled with selected coolant. Shake bottle and pour calculated amount of Coolant Boost into radiator. Start engine, turn heat on high and run for 15 minutes. Do NOT use distilled water unless mixed with 50% antifreeze.

Dosage: For straight water applications, add 2 fl. oz. of Coolant Boost per quart of tap or softened water. For 50/50 coolant/water applications, add 1 fl . oz. of Coolant Boost per quart of 50/50 mix.

Frequency: In applications using Coolant Boost with straight water, drain and re-fill the coolant system and add Coolant Boost once per year or when indicated by color change. A distinctive pH color change indicates when the pH has fallen to a point where corrosion can set in. When the Coolant Boost/water mixture changes from pink to clear, another dosage of Coolant Boost should be added. Monitoring the pH level will ensure all vital areas of the cooling system are protected against corrosion.

In applications using Coolant Boost with 50/50 coolant/water mixtures, add Coolant Boost once per year or every 30,000 miles, whichever comes first. Follow coolant manufacturer recommendations for coolant change intervals.

Share

Amsoil Tow package protection for heavy towing

image

Purchase by using the hyperlinks in this page

AMSOIL Synthetic Automatic Transmission Fluids and Severe Gear® Synthetic

Gear Lubes Provide Maximum Protection for Extreme Operating Conditions

Whether hauling heavy tools and equipment to a job site or towing a boat for a relaxing weekend on the lake,
many vehicles are subjected to extreme operating conditions and hot temperatures in the summer, placing an
increased level of stress on drive train components. New vehicles such as turbo-diesel trucks and vehiclesimage
with V-10 engines boast more horsepower and torque than their predecessors, but differential designs have remained virtually unchanged. Differentials today are subjected to severe-duty service and encounter more stress and heat than was seen only a few years ago. Modern gear oils are faced with the challenge of providing adequate wear protection during severe service operating conditions, while also providing maximum fuel efficiency.

The extreme pressures and temperatures generated by modern vehicles increase stress on gear lubricants and can lead to a serious condition known as thermal runaway. As temperatures in the differential climb upward, gear lubricants lose viscosity and load carrying capacity. When extreme loads break the lubricant film, metal-to-metal contact occurs, increasing friction and heat. This increased friction and heat, in turn, results in further viscosity loss, which further increases friction and heat. As heat continues to spiral upward, viscosity continues to spiral downward. Thermal runaway is a vicious cycle that leads to irreparable equipment damage from extreme wear, and ultimately catastrophic gear and bearing failure.

Many people overstress their vehicles in the summer. It is not uncommon to see vacationing families driving around in overloaded vehicles. The roof rack is filled with equipment, the back seat is filled with bags and the suspension is bottomed out. Some vehicles also pull trailers or fifth-wheels with boats, and some of these vehicles exceed their rated towing limits. As vehicle stress increases, transmission and differential temperatures rise and cause conventional lubricants to thin, resulting in inadequate lubrication that can lead to component failure. In addition, some vehicle manufacturers require the factory-fill differential gear lube to be changed within the first 3,000 miles, or the first 500 miles if towing, a fact not known by many consumers. Because differentials go through a break-in period and are not equipped with filters like transmissions and engines, the gear lube must be changed in order to drain the break-in wear particles. These particles, if left in the differential, mesh between the gears and cause gear or bearing wear.

Recent studies show that most differential wear occurs in the fi rst 5,000 miles. The AMSOIL “Tow Package”
AMSOIL Synthetic Automatic Transmission Fluids (ATF, ATL) and Severe Gear Synthetic Gear Lubes (SVG, SVT, SVO) provide maximum protection in demanding environments such as towing, hauling and commercial use, providingimage increased lubricant film protection and reduced wear at elevated temperatures. They are formulated for extended drain intervals of up to 50,000 miles in severe service and 100,000 miles in normal service, or longer where specified by the vehicle manufacturer.

Share

4 Great Ways To Find Customers For Your Moving Truck Business

A moving truck business is one of the most profitable types of trucking business. Aside from the fact that people are moving all the time, there are also always lots of things to move—from furniture to electrical appliances to even loads of food and beverages. It is not a surprise that many people who enter the trucking industry prefer this specific type of trade.

If you are in this kind of business and you have around 5 to 10 trucks you wish to expand, here are four great ways on how to find more customers for your business that will help it grow in no time.

Great Way # 1 – Advertise the Traditional Way
The first thing you need to do to get customers for your company is of course, to let people know you exist! Raising awareness about your company is surely the first crucial step in this endeavor. And one of the best ways to do that is through traditional advertisement.

A press release regarding your company’s expansion published in the local newspaper will certainly start making waves. Then you can work on to have fliers, brochures, calling cards, and posters distributed to your target audience to let people know about your business. And if you’re willing to spend more (and reap more in return), it would also be a great idea to advertise with radio stations, yellow page advertisings, and even ads on billboards.

All of these tactics would surely bring more customers to your doorstep. The power of advertising is truly immeasurable to businesses.

Great Way # 2 – Advertise Online
Another fantastic way to advertise your moving truck business is via the online route. Not only is this technique high-tech, it also costs considerably less. First, you need to put up a professional website that would inform people about your company, services, rates, special offers, contact information, and so on.

But it does not end here, you also need to drive traffic to your site to ensure that people are coming to your site. How do you do this? This is where SEO comes in. SEO, which stands for Search Engine Optimization can help boost your company’s website and drive traffic to it.

For one, you can hire SEO writers to create SEO optimized articles to be distributed all over the Internet that will link back to your website. Now, if this is too much work for you or you decide you are not Internet-savvy at all, you can still take advantage of the online world by posting free advertisements on online classified ads. Yes, many people now use this to search for moving truck rentals.

Great Way # 3 – Expand your Network
Just like with any business, you can get more customers simply by expanding your network. How do you do this? A conversation with a client would go a long way. Be sure to establish good working relations with your customers. You can also further expand your network by joining communities and organizations on trucking businesses.

Great Way # 4 – Use Marketing Strategies
Marketing strategies would not only keep your current customers happy but also attract new customers. For example, you can offer discounts on current customers with increased freight loads or new customers trying your business for the first time.

You can also give away items that have your company’s name or logo on it such as t-shirts, coffee mugs, pencils, bags, and many others. Just make sure that the items you choose are everyday items that customers are likely to use, as this would give more exposure to your company. Printing your logo on a figurine does not make any sense, as this would only accumulate dust in the corner of your customer’s living room.

A moving truck business can surely be rewarding for you, especially in terms of the profits. However, you should not just sit back and relax, you should always be on the lookout for new customers to further grow and expand your business.

Read practical things to know about the topic of 0 car finance – please study the webpage. The times have come when proper information is really at your fingertips, use this opportunity.

Share

How To Use Technology To Boost Your Trucking Business

There is no doubt about it. Technology has made so many things easier for us. From how we buy things to how we communicate with people—everything has become instant with the touch of a button. It is not any different with starting and managing a business like a trucking business.

Modern technology can certainly do wonders for your trucking business in ways you can hardly imagine. It can increase management and employee efficiency, maximize profits, and reduce expenses. Here are the top ways on how you can take advantage of technology to grow and boost your business.

Go Online
Starting a trucking business required buying trucks and finding customers. If you are a traditionalist who has never heard of the online market yet, you surely are missing many things. The online world can open up various kinds of opportunities for you and your business.

For one, you can put up a website to make it easier for clients/customers to deal and transact with you. You can also find potential customers via the online route by posting free advertisements in different online classified ads. You would probably be surprised at the huge number of people who now do their daily businesses online. Advertising online will reap wondrous benefits for your company.

Moreover, you can also purchase your trucks in the online market. Yes, it is hard to imagine that you can buy such a gigantic thing over the Internet but that is what technology has been doing to us since time immemorial—surprising us with incredible feats we never thought possible. This would save you time, energy, and even money since moving trucks are often cheaper in the online market. If you are starting with 2 to 3 trucks in your realm, you can soon expand to 10 or more in no time.

Use Custom Software
Managing a business can be a big challenge especially if you are a newbie in the trucking industry. Nowadays, it can be a cinch. Thanks to custom software applications that would handle operations such as recordkeeping, billing, accountancy, and reporting automatically. Manual handling of these tedious tasks would eat up a good amount of your time, which you can use instead for formulating strategies to grow your business or overseeing that your employees are doing a great job in keeping customers satisfied.

Equip your Drivers with Gadgets
Cellular phones and GPS are few must-haves that every truck driver needs to do well in his job. The cell phone is necessary to be able to communicate with you and the customers at all times. The GPS meanwhile is to ensure that the driver is always on the right track. You don’t want your perishable fruits and vegetables delivered to the wrong location, do you?

Now if you are feeling extra generous, you would also want to equip your drivers with a portable dash mountable camera with DVR that can record important details on the road like weather, road conditions, rude drivers, and so on.

Whether you have moving truck rentals or hauling trucks, technology can be on your side when it comes to boosting your business. Be sure to take advantage of the benefits it can bring you and your trucking business.

Get useful advice in the sphere of 0 car finance – read the site. The time has come when proper info is truly at your fingertips, use this opportunity.

Share