Home » Posts tagged "engine" (Page 2)

AMSOIL SYNTHETIC LUBRICANTS INCREASE FUEL ECONOMY 6.54 PERCENT

imageAMSOIL SYNTHETIC LUBRICANTS
INCREASE FUEL ECONOMY
6.54 PERCENT IN DIESEL
TRUCKING APPLICATIONS1

FREE Amsoil Catalog

For a copy of this study, ask for it in the catalog request form!

Use this link for all Amsoil heavy trucking products on one page.

Industry-Standard Testing

image

To determine the fuel economy benefits of its synthetic lubricants, Amsoil conducted the industry-standard SAE J1321 In-Service Fuel Economy Test Procedure.
First, the baseline rate of fuel consumption was determined for two nearly identical Kenworth® T800B diesel trucks and 53’ trailers from Ford® Motor Company’s* Rawsonville, MI fleet. Texaco brand conventional lubricants were installed in each vehicle’s engine, transmission, and front and rear differentials. Both trucks simultaneously completed runs on a 40-mile test route representative of real-world driving conditions beginning and ending at Ford’s Rawsonville fleet maintenance facility.
Fuel consumption was recorded from each vehicle’s engine control module (ECM)
following each run. Although both vehicles were operated using the same conventional
lubricants and according to the same procedures, the test truck consumed an average
of 0.37 more gallons of fuel per run compared to the control truck.

 

image

 

The test truck alone was then thoroughly flushed of its conventional lubricants prior to
installing AMSOIL synthetic lubricants. Both trucks simultaneously completed runs on
the test route according to the same procedures used during the baseline segment. Fuel
consumption data was again recorded from the ECMs. The switch to AMSOIL synthetic
lubricants eliminated the 0.37-gallon difference in fuel consumption per baseline
segment run, resulting in 6.54 percent improved fuel economy.

image

 

WordPress Tags: AMSOIL,SYNTHETIC,LUBRICANTS,INCREASE,FUEL,ECONOMY,PERCENT,benefits,industry,Service,Test,Procedure,consumption,Kenworth,Ford,Motor,Company,Rawsonville,fleet,Texaco,vehicle,engine,transmission,Both,world,maintenance,module,Although,procedures,truck,trailers,differentials,vehicles,trucks

Share
Posted on December 26, 2011 by , Reply

Stored Equipment Needs Protection – Engine Fogging Oil

FREE Amsoil Catalog

Engine Fogging Oil

As fall turns to winter, customers in many parts of the country begin placing summer work and recreational equipment; including motorcycles, boats, lawnmowers, construction and farm equipment; into winter storage. Ensure customers’ stored equipment is protected throughout the winter season and in top condition when it is put back into service in the spring. Engine fogging oil helps protect your equipment.

AMSOIL Engine Fogging Oil

amsoil engine fogging oil

amsoil engine fogging oil

Fluctuations in ambient temperatures can cause water vapor to form condensate within stored engines. When this condensate comes into direct contact with steel
and iron components, it forms surface corrosion on cylinder liners, piston rings, anti-friction bearings and steel/
iron contact surfaces on rotational seals. Long periods of storage can also dry out cylinders, often resulting in permanent damage when the equipment is taken out
of storage and dry-started. Most two- and four-stroke motor oils are formulated to have an affinity to engine component surfaces, acting as a barrier that keeps condensate from contacting engine components and forming corrosion.
However, the effectiveness of motor oil in this area diminishes with time.

 

AMSOIL Engine Fogging Oil (FOG)

offers superior film retention, providing long-term
protection against corrosion and dry starts, etending engine life and reducing operating expenses. Amsoil engine fogging oil is an aerosol spray formulation offers easy and clean application, while
reaching more components and offering complete distribution of the oil, something especially beneficial in applications with horizontal cylinder orientation, such as outboard
motors. Consult equipment owner’s manual for application directions.

AMSOIL Gasoline Stabilizer

Gasoline is not formulated for long-term storage and can start to degrade in as little as 60 days, leading to varnish and sludge deposits that clog injectors, fuel lines and carburetors; stick oats; and cause poor engine performance, starting problems, increased maintenance expenses and decreased equipment life. It is difficult to drain all of the fuel from equipment before storage, and doing so would expose the to other problems, including the formation
of rust and corrosion on the bare metal in the tank and fuel system and the drying and cracking of gaskets and seals.
Some fuels are pre-treated with oxidation inhibitors that allow them to be stored for short periods without forming excessive deposits, while other fuels have no inhibitors at all. AMSOIL Gasoline Stabilizer (AST) reduces
the oxidation that occurs when fuel is stored for extended periods, improving performance, extending equipment life
and decreasing maintenance expenses.

www.syntheticoilhq.com

Technorati Tags: ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

Share
Posted on December 12, 2011 by , 3 comments

AMSOIL INTERCEPTOR snowmobile oil | Amsoil snowmobile oil.

Amsoil Snowmobile Oil

Buy online, or get a FREE Amsoil Catalog

See all Amsoil snowmobile oil products here.

image

Amsoil snowmobile oil

INTERCEPTOR™ High Performance Synthetic 2-Cycle Oil (AIT)
A high-performance two-cycle oil with a performance emphasis on exhaust power valves. Excellent for all types of snowmobiles, motorcycles, personal watercraft, ATVs and jet boats. Contains high levels of detergent additives to prevent valve sticking. High quality replacement for manufacturer branded oils. Injector use or 50:1 premix. JASO FC, API TC

Amsoil Snowmobile Oil

Amsoil Snowmobile Oil AMSOIL INTERCEPTOR™ Synthetic 2-Cycle Oil is formulated with a proprietary blend of the finest synthetic base oils and additives available today. This unique AMSOIL Chemistry represents a breakthrough development in the field of two-cycle engine lubrication. The backbone of AMSOIL INTERCEPTOR 2-Cycle Oil is a specially developed molecularly saturated synthetic base oil. This, combined with a robust additive package, ensures exceptional lubricity, cleanliness and optimum clean-burning characteristics. Extensive research and testing, including a full snowmobiling season in severe Rocky Mountain applications, has proven that wear on cylinders, pistons and bearings is significantly reduced. And with up to 30 percent more detergency and dispersancy additives than typical two-cycle oils, Amsoil Snowmobile Oil AMSOIL INTERCEPTOR virtually eliminates hard carbon deposits that cause exhaust power valve sticking, ring sticking and preignition-promoting “hot spots” in the combustion chamber.

  • Helps prevents hard carbon deposits that cause exhaust power valve sticking and ring sticking.
  • Superior lubricity controls cylinder, piston and bearing wear.
  • Reduces smoke and odor associated with two-cycle engines.
  • Helps prevent plug fouling.
  • Provides exceptional SAE #4 cold temperature fluidity (-58°F pour point).
  • Versatile and excellent for all types of recreational equipment.
  • Protects against rust.
  • Helps prevent pre-detonation from combustion chamber “hot spots.”

 

Amsoil Snowmobile Oil

PRODUCT DESCRIPTION
AMSOIL INTERCEPTOR Synthetic 2-Cycle Oil is formulated with a proprietary blend of the finest synthetic base oils and additives available today. This unique AMSOIL chemistry represents a breakthrough development in the field of two-cycle engine lubrication.

The backbone of AMSOIL INTERCEPTOR 2-Cycle Oil is a specially developed molecularly saturated synthetic base oil. This, combined with a potent additive package, ensures exceptional lubricity, cleanliness and optimum clean-burning characteristics. Extensive research and testing, including a full snowmobiling season in severe Rocky Mountain applications, has proven that wear on cylinders, pistons and bearings is dramatically reduced. And with up to 30 percent more detergency and dispersancy than typical two-cycle oils, AMSOIL INTERCEPTOR virtually eliminates damaging deposits on piston skirts, ring grooves and exhaust power valves.

APPLICATIONS

AMSOIL INTERCEPTOR Synthetic 2-Cycle Oil is recommended as an injector oil or at a 50:1 mix ratio in carbureted, electronic fuel Injected (EFI) and direct fuel injected (DFI) snowmobiles, personal watercraft, motorcycles, ATVs and jet boats, including, but not limited to, those manufactured by Bombardier®, Yamaha®, Arctic Cat®, Polaris®, Kawasaki®, Suzuki® and Honda®.

It is recommended wherever JASO FC or API TC two-cycle oils are specified. INTERCEPTOR is a premium quality replacement for recreational equipment manufacturers’ branded two-cycle oils. It is compatible with most mineral and synthetic two-cycle oils, however, for best performance, mixing oils should be minimized.

400,000 Miles of Severe Snowmobile Field testing With No Deposit Buildup, Power Valve Sticking, Ring Sticking or Engine Failures.
Subjected to adverse field testing conditions in the Rocky Mountains, including long trail rides, high RPM powder riding and steep hill climbs, AMSOIL INTERCEPTOR demonstrated superior wear protection and outstanding deposit control.

.

Amsoil snowmobile oil

Amsoil snowmobile oil

No carbon deposits are detectable in the functioning region of the exhaust power valves, resulting in “no stick” performance, continuous valve operation and reduced maintenance.

Amsoil snowmobile oil

Pistons show no scoring, little or no wear and no heavy deposits, and wrist pins show no discoloration from heat. In fact, the original machine markings on the pistons are still visible.
Cylinder head is clean with no deposits, preventing pre-ignition problems.

http://www.syntheticoilhq.com

http://www.syntheticoilhq.com/blog

Engine Fogging Oil

WordPress Tags: AMSOIL,INTERCEPTOR,Snowmobile,FREE,Catalog,products,High,Performance,Synthetic,Cycle,emphasis,Excellent,ATVs,valve,replacement,manufacturer,Injector,JASO,Chemistry,development,engine,characteristics,Extensive,Rocky,Mountain,combustion,chamber,Superior,cylinder,odor,temperature,Versatile,equipment,detonation,PRODUCT,DESCRIPTION,ratio,Bombardier,Yamaha,Arctic,Polaris,Kawasaki,Suzuki,Honda,mineral,Miles,Severe,Field,Deposit,Buildup,Power,hill,protection,boats,cylinders,manufacturers,Failures,Mountains,snowmobiles,motorcycles,watercraft,proprietary,lubrication,pistons,detergency,dispersancy,carbon,piston

Share
Posted on December 12, 2011 by , 2 comments

Testimonial for Amsoil Synthetic Motorcycle 20W-50

Synthetic Motorcycle 20W-50

This is a reprint of a testimonial sent to Amsoil Corporate. – editor

Hello,

Synthetic Motorcycle 20W-50

Synthetic Motorcycle 20W-50

You’ll notice by my signature below that I am an employee of Chevron Global Lubricants. I am a training specialist and field engineer for our North American lubricants division. I originally worked for Amoco at the R&D facility before moving into marketing, and while in that role, Chevron bought our lubricants business right after I moved to Florida.

All in all, I have more than 34 years of experience in fuels and lubricants testing, development and tech service support.

I own three motorcycles that I either drive on the street or race. What I wanted to share with you today is my experience with my drag bike.

It is a Yamaha Roadstar Warrior. Originally built as a power cruiser, but now it is stretched, slammed and built to run on E-85 fuel and nitrous oxide. I have taken this bike from a fun street cruiser to a beast that wants to jump out from under me every time I snap the throttle.

Synthetic Motorcycle 20W-50

The engine is putting out more than three times the horsepower it was originally built with, and with the highly oxygenated fuel, nitrous, and severe use, I have been battling cylinder and piston ring distress for a couple of years. Essentially, whenever I did a teardown, there was evidence of streaking of the Nikasil-lined aluminum cylinder, essentially a scuffing situation that is aggravated by the high cylinder pressures and fuel dilution. Synthetic Motorcycle 20W-50

Since Chevron does not make motorcycle oils, I have had to try many of the “other” different motor oils, all synthetic. To make a long story short, I should have read your white paper on motorcycle oil testing. It would have saved me at least three premature teardowns. Synthetic Motorcycle 20W-50

Synthetic Motorcycle 20W-50

Bottom line — the AMSOIL Synthetic Motorcycle 20W-50 has completely solved my problems. I have been running it for over a year now, and compression and leakdown have stayed at the exact level as when the engine was freshly rebuilt. This weekend, I tore down the top end to try a new piston ring combination, and the cylinders had absolutely NO sign of streaking or other wear-related distress. Synthetic Motorcycle 20W-50

Also, all other clearances, including valve lash and valve guide and bearing have stayed the same. This is truly remarkable.

In my training endeavors, I run into a lot of end users who are high performance junkies just like me. I have no problem sharing my experience with the AMSOIL products.

Thank you so much for the great product.

Best Regards,
Sam Vallas
Training Specialist
Chevron Global Lubricants

Free Amsoil Catalog

non-toxic antifreeze

WordPress Tags: Testimonial,Amsoil,Synthetic,Motorcycle,engine,times,cylinder,Nikasil,situation,dilution,Chevron,paper,Bottom,problems,compression,combination,Also,valve,cylinders,three,piston

Share
Posted on December 11, 2011 by , 1 comment

Family Handyman Magazine Gets it Right on Synthetic Oil Myths – almost : Amsoil Engine Flush.

Amsoil Engine Flush

Family Handyman magazine

Family Handyman Magazine had a short tip on the 4 Big Synthetic Oil Myths. www.familyhandyman.com

The big four myths listed were;

  1. You have to flush the engine before you can run synthetic oil in it. FALSE. You should NEVER flush your engine. All carmakers warn against this practice. (editorial comment; this is the one reaction we disagree with)
  2. Synthetic oil causes leaks. FALSE. This was true 25 years ago. Not anymore. Current formulations contain seal conditioners to prevent leaks.
  3. Once you switch to synthetic, you can’t go back to regular oil. FALSE. No truth whatsoever to this one.
  4. Since synthetic oil flows better when cold, I can ignore the manufacturer’s recommendations for 5W- 20 and use 10W-30. FALSE. Heavier weight oil reduces fuel efficiency and can mess up valve timing mechanisms. Stick with the manufacturer’s oil weight recommendations.

Amsoil Engine Flush

In general, Family Handyman gets it straight on these tips. These have each been a long standing myth so it’s good to get a major magazine to clear the air. We agree with their reaction to tips 2,3, and 4.

Engine Flush

Amsoil has sold an engine flush product for years. In many cases, it’s not needed. However, in certain cases it’s a proper product to use to transition a car to synthetic oil. It’s been used in thousands of vehicles by thousands of Amsoil customers with no issues.

Amsoil Engine Flush

Amsoil Engine Flush AMSOIL Engine and Transmission Flush (FLSH) helps restore fuel economy, increase operating efficiency and reduce emissions in gasoline and diesel engines, and automatic transmissions. Its potent, detergent-based formula cleans sludge and deposit build-up, promoting lower operating temperatures and reduced oil consumption. AMSOIL Engine and Transmission Flush is safe on parts and can be easily disposed of with waste oil. Amsoil Engine Flush

Restores Vehicles to Like-New
New engines and transmissions run more efficiently, but over time they gather harmful deposits that cause power and performance loss. Stop-and-go driving, prolonged idling, short trips that do not allow the engine to reach full operating temperature, towing, the ingestion of airborne dirt, fuel dilution, water condensation and oxidized oil all can promote sludge build-up in motor oil and transmission fluid. As it settles, sludge clogs narrow oil passages, restricting oil flow to vital parts, especially the upper valve train area. Amsoil Engine Flush

In transmissions, deposits can form on clutch plates, causing hesitation and erratic shifting. Ultimately clutch glazing can set in, reducing the life of the transmission. Deposits in engines and transmissions can accelerate wear, causing power loss and increased fuel consumption. Amsoil Engine Flush

• Cleans engines and transmissions for improved efficiency, fuel economy and lower emissions
• Prolongs equipment life
• Detergent-based formula more environmentally friendly
• Compatible with seals and gaskets
• One-treatment results
• Easily disposed of with waste oil

Installing new oil or transmission fluid into a dirty vehicle may not be enough to remove deposits and increase efficiency. The detergents and dispersants in some lubricants may not be able to handle leftover sludge and deposits, and the new lubricant soon becomes unfit for service, accelerating the formation of even more harmful deposits. Amsoil Engine Flush

AMSOIL Engine and Transmission Flush Benefits
Unlike many flush products, AMSOIL Engine and Transmission Flush features a multi-use formulation that dissolves and disperses sludge, varnish and deposits in both engines and automatic transmissions. Due to its detergent-based formulation, used AMSOIL FLSH can be easily disposed of with waste oil, making it more user-friendly. Its advanced formula of light base oil technology, powerful detergents and dispersants provides safe cleaning action. AMSOIL FLSH is compatible with both petroleum and synthetic oils, preparing poorly maintained equipment for installation of new oil. It represents the first step toward restoring neglected equipment to top-notch performance. AMSOIL Engine and Transmission Flush provides the following benefits in only one treatment:

Gasoline and Diesel Engines

• Helps loosen sticky valves and rings, minimizing blow-by and reducing emissions
• Helps quiet lifter noise
• Promotes lower operating temperatures through sludge removal
• Easy disposal

Automatic Transmissions

• Cleans deposits in oil cooler and ports
• Helps unclog fluid passages
• Cleans deposits and varnish from clutch plates, helping improve efficiency
• Promotes smoother operation and transmission life through reduced shift delay

Applications
AMSOIL Engine and Transmission Flush is recommended for diesel and gasoline engines, and automatic transmissions. It is not recommended for CVT transmissions or differentials.

Directions for Use
Though it works in one treatment, AMSOIL Engine and Transmission Flush is safe enough to be used at every oil change. If using a flushing machine, follow the manufacturer’s recommendation. Otherwise, use the following guidelines:

Engine: Add 16 oz. bottle of AMSOIL Engine and Transmission Flush to engine oil fill port. Idle the engine for 10-15 minutes, then immediately drain the oil. Ensure enough time for the system to completely
drain. Remove and replace the engine oil filter. Refill engine with new engine oil in the viscosity grade recommended by the manufacturer.

Transmission: Engage emergency brake. Add 16 oz. bottle of AMSOIL Engine Flush to transmission oil fill port. Idle for 10-15 minutes; shift through drive and reverse. Do NOT place vehicle under heavy load. Drain entire transmission and torque converter of fluid. FILTER MUST BE CHANGED prior to refilling with new transmission fluid.

NOTE: It is not recommended to flush transmissions that do not have a removable pan or access to the transmission filter.

 

Amsoil Engine Flush

Amsoil Engine Flush

 

 

 

 

 

 

 

(above) Automatic transmission clutch plates pre-cleanup. Varnish and glazing is heavy on some of the plates.

Amsoil Engine Flush

Amsoil Engine Flush

 

 

 

 

 

 

 

(above) Automatic transmission clutch plates after cleanup with AMSOIL Engine Flush reveal lighter glazing and varnish.

Amsoil Engine Flush

Amsoil Engine Flush

 

 

 

 

 

 

 

(above) Cylinder head pre-cleanup. Note the sludge deposits on and around the valve springs and push rod openings.

Amsoil Engine Flush

Amsoil Engine Flush

 

 

 

 

 

 

 

(above) Cylinder head after cleanup with AMSOIL Engine Flush. The valve springs and push rod openings are noticeably cleaner, with fewer sludge deposits. The manufacturer’s stamping is more easily seen.

http://www.syntheticoilhq.com

Diesel fuel treatment

WordPress Tags: Handyman,Magazine,Synthetic,Myths,engine,FALSE,editorial,reaction,Current,Once,truth,manufacturer,Heavier,efficiency,valve,Stick,tips,myth,Flush,Amsoil,product,cases,transition,customers,Transmission,FLSH,gasoline,formula,sludge,consumption,performance,Stop,temperature,ingestion,dirt,dilution,condensation,area,plates,hesitation,life,equipment,Detergent,Compatible,treatment,results,vehicle,lubricant,formation,Benefits,products,features,user,technology,action,petroleum,installation,Diesel,Engines,rings,lifter,noise,removal,Easy,disposal,Automatic,operation,Directions,Though,machine,recommendation,Otherwise,guidelines,bottle,port,Idle,Ensure,system,Remove,Refill,Engage,emergency,Drain,FILTER,NOTE,cleanup,Varnish,Cylinder,recommendations,mechanisms,vehicles,emissions,transmissions,temperatures,ports,differentials,thousands,detergents,dispersants,formulation

Share
Posted on December 9, 2011 by , 2 comments
First « 12345 » Last