Convenient pocket on left chest. Constructed of 50/50 cotton/polyester blend to reduce fading. Four color options. Sizes S-3X.
WordPress Tags: Amsoil,Shirts,Simple,Pocket,White,Blue,Black,Convenient,chest,cotton,Four,options,Sizes
Amsoil – Synthetic Oil HQ | Amsoil Synthetic Oil | Synthetic Motorcycle OilAmsoil Synthetic Lubricants – Synthetic Oil Headquarters Blog |
Free Amsoil Catalog shipped to you door.
The fall months are the time to place boats, motorcycles and lawn care equipment into storage and prepare snowmobiles, snowblowers and other vehicles for the coming winter.
AMSOIL products are formulated to provide maximum protection for engines and fuel systems during storage, while Amsoil synthetic motor oils’ low pour points provide superior cold-temperature protection and performance in two-and four-stroke winter equipment.
Gasoline can break down in as little as 60 days, causing varnish and gums that clog injectors, fuel lines and carburetors, leading to poor engine performance and starting problems. In many applications, draining the fuel system can be impractical, and doing so can expose the system to corrosion on the bare metal in the tank and fuel system and cause gasket and seal cracking.
AMSOIL Gasoline Stabilizer reduces the oxidation that occurs when fuel is store for extended periods, improving performance, extending equipment life and decreasing maintenance expenses.
During storage, fluctuations in ambient temperatures can form condensation within the engine that can cause surface corrosion on cylinder liners, piston rings, anti-friction bearings and steel/iron contact surfaces on rotational seals. Long periods of storage can also dry out cylinders, often resulting in permanent damage when the equipment is dry-started in the spring.
AMSOIL Engine Fogging Oil offers superior film retention, providing long-term protection against corrosion and dry starts, extending engine life and reducing operating expenses. Its aerosol spray formulation offers easy and clean application, while reaching more components and offering complete distribution of the oil, something especially beneficial in applications with horizontal cylinder orientation, such as outboard motors.
Conventional oils thicken in the cold, which can result in inadequate lubrication to critical engine parts at cold start-up, or even prevent the engine from starting.
AMSOIL Formula 4-Stroke Power Sports Synthetic Motor Oil provides serious protection and performance in four-stroke engines, including ATVs and snowmobiles. Its broad 0W-40 viscosity rating effectively protects in both hot and cold temperature extremes.
AMSOIL Formula 4-Stroke Synthetic Small Engine Oil provides exceptional protection in the severe-service conditions common in both gasoline-and diesel-fueled small engines including welders, skidsteers, compressors, snowblowers and more. It remains fluid at sub-zero temperatures for superior cold-weather protection.
Winter Two-Stroke Performance
AMSOIL DOMINATOR and INTERCEPTOR
Synthetic 2-cycle Oils provides exceptional performance in snowmobiles and other two-stroke equipment. Amsoil DOMINATOR is formulated with heavier base oils for “on the edge” operation, while also protecting pistons and bearings subjected to the rigors of extreme riding.
AMSOIL INTERCEPTOR is engineered specifically for power-sports applications and engines equipped with exhaust power valves. It contains the finest synthetic base oils and additives for exceptional cleanliness, while controlling exhaust valve sticking and providing outstanding overall lubrication.
Gasoline Additive
AMSOIL Quick shot SE is formulated to thoroughly clean varnish, gums and insoluble debris in two-and four-stroke gasoline-powered small engines and power sports equipment fuel systems, restoring peak performance. Amsoil Quickshot effectively addresses performance issues related to ethanol, water and dirty pump gas, while stabilizing fuel between uses and during short-term storage periods. Use Amsoil for fewer fuel related problems and better winter performance.
A Federal Court Judge has denied a Harley Davidson motion to dismiss Harley bikers’ claims for fraudulent and unfair business practices, violations of Consumers Legal Remedies Act (CLRA), and unjust enrichment. A class action lawsuit may now go forward against Harley Davidson alleging certain Harley motorcycle engines produce severe, and excessive heat causing burn injuries and clothing to catch on fire.
Valenica, CA (PRWEB) August 06, 2011
Last week, a federal judge ruled that a class action lawsuit against Harley Davidson could go forward, siding with four bikers who claim their Harley Davidson motorcycles were defectively designed because their engines ran so hot as to pose a constant danger to riders of being burned and were therefore not fit for their intended use.
The complaint alleges that since 1999, Twin Cam 88, 96, 103 and 110 cubic inch engines in Harley motorcycles produce severe, excessive heat causing clothing to catch on fire, burn injuries and the danger of burn injury to riders and passengers as well as overheating causing premature engine wear and in models manufactured after 2006, transmission failure. Although Harley Davidson asked the Eastern District of California court to throw out the claims under state law, the U.S. District Judge sided with the bikers.
Harley Davidson Sued Harley Davidson Sued Harley Davidson Sued
Greg Owen, a partner at Los Angeles personal injury attorneys Owen, Patterson & Owen and one of the lawyers representing the plaintiffs in this case, states, “Harley Davidson has known about this problem from the early 2000s and has the technology to fix it, but has chosen to sell tens of thousands of touring bikes here in California without disclosing this known defect. When Harley customers complain to Harley’s dealers after purchase, Harley’s response is that’s normal and it refuses to offer an effective fix to the problem.”
Owen believes the unsafe heat problem is due to Harley selling larger engines that cannot comply with the emission standards of many states, including California.
‘The fix is pretty simple,’ says Owen, “and Harley already has it – manufacture touring bikes with liquid cooled engines instead of air cooled engines. If Harley did that this serious design and safety defect would go away.”
The recent ruling allows the case to move forward, and Harley Davidson will now face Class Action Certification process at the end of the month.
Four Sacramento-area riders are suing Harley-Davidson, saying their bikes get dangerously hot. One even says his pants caught fire while riding. Now a class action lawsuit has brought against the motorcycle maker.Read the local story here; http://sacramento.cbslocal.com/2011/06/23/call-kurtis-harley-davidson-lawsuit/
FREE Amsoil Catalog, no obligation, 58 pages of good information sent via USPS
New AMSOIL Engine Assembly Lube (EAL) is formulated to cling to engine parts and provide exceptional wear protection while inhibiting rust and corrosion in newly built or rebuilt four-stroke engines. It is designed to dissolve in oil, helping eliminate oil port clogging and deposit formation, and represents a premium option for performance enthusiasts, engine builders and race teams. It also presents a perfect complement to AMSOIL Break-In Oil (BRK), Dominator® Racing Oil (RD20, RD30, RD50) and Z-ROD™ Motor Oil (ZRT, ZRF).
Clings Tenaciously to Parts
Because building an engine can take from a few days to many months, using an engine assembly lube that clings well to parts for extended periods is critical. AMSOIL Engine Assembly Lube is formulated with a high-viscosity base oil and a unique tackifier for long-lasting, tenacious cling.
Exceptional Wear Protection
During initial startup, engines operate momentarily with little-to-no oil pressure, placing camshaft lobes, lifters, rocker arms, bearings and other critical parts at high risk of wear and failure. In addition to inhibiting wear by clinging to parts, AMSOIL Engine Assembly Lube contains high levels of antiwear additives for further protection.
Inhibits Rust and Corrosion
An engine can sit in a garage partially assembled for long periods, allowing moisture and oxygen to form rust on exposed metal surfaces. Amsoil assembly lube contains rust and corrosion inhibitors that protect engine components during inactivity.
Dissolves in Oil
Grease-based assembly lubes can increase the risk of oil port clogging if the grease is not fully consumed at initial startup, potentially causing engine failure. AMSOIL Engine Assembly Lube is designed to dissolve in oil, helping oil ports remain clean, and helping to eliminate deposit formation under the valve covers and in the oil pan.
Easy and Precise Application
Amsoil assembly lube is packaged in convenient 4-oz. tubes, allowing for cleaner, more precise application compared to other products.
APPLICATIONS
AMSOIL Engine Assembly Lube is recommended for any new or rebuilt four-stroke engine, including racing and performance engines, and should be applied to all areas of the engine susceptible to initial startup wear.