Home » Posts tagged "protection" (Page 2)

Fire Department Counts on AMSOIL Synthetic Lubricants

Get a FREE Amsoil Catalog

Amsoil

Amsoil

Direct Jobber Craig Hamrick of Macomb, Ill. has been a firefighter in charge of fleet maintenance for 23 years. “My wife and I have been Dealers since 2006 and became Dealers after seeing the impressive results AMSOIL demonstrated in the fire department fleet,” Hamrick said. The fire department is a commercial account of Dealer Glenn Mike Arnold, Hamrick’s sponsor. “We have used Amsoil lubricants since 2003 in the fleet,” Hamrick said. The department has 11 vehicles and numerous small engines and generators, all running with Amsoil products. “Glenn’s knowledge of Amsoil products has helped us select the right products for our needs. Every vehicle in our fleet has AMSOIL installed from front to back.” AMSOIL Powers Generator The Macomb Fire Department generator at the main station is an Onan 150KW unit that is powered by a Cummins QSB 6.7 liter diesel. The generator is equipped with an AMSOIL Duel Remote By-Pass System and Ea Full-Flow and By-Pass Filters. For ease of oil sampling, there is a petcock on one of the ports on the filter housing. The engine is filled with AMSOIL  premium API CJ-4 5W-40 Synthetic Diesel Oil (DEO). “The reason for choosing Premium 5W-40 over AMSOIL Premium 15W-40 Synthetic Diesel Oil (DME) is the slightly better flow characteristics of the 5W-40 for cold-weather startup,” Hamrick said. “While this unit has a block heater to keep the coolant warm, the oil can still be fairly cold. This generator must go from stopped to running with full electrical load in less than one minute. The cold flow characteristics of AMSOIL diesel oil provide maximum protection and peace of mind for me and our department.”

Get a FREE Amsoil Catalog

The fuel is also treated with AMSOIL Diesel Concentrate plus Cold Flow Improver at each fill-up. “The savings are substantial,” Hamrick said. “We only change oil based on oil analysis now, where before we changed every three months or 250 hours. Fleet uptime is one of the most important benefits for us.  Our equipment must respond and perform at maximum capability every time. The generator is just as important.” Oil Analysis Proves AMSOIL Benefits. Hamrick said he was a skeptic of extended drain intervals when he first was approached about AMSOIL synthetics. However, he soon learned the saving potential of AMSOIL synthetic lubricants. The department saves money through the reduction of waste oil generated, as well as fewer costs for equipment repairs and services, both in time and labor.

Get a FREE Amsoil Catalog

The department regularly sends oil samples to OIL ANALYZERS as part of its maintenance program. “The proof is in all of the oil analysis reports,” he said. “We can see by the results.” AMSOIL lubricants are especially well-suited to emergency service vehicles where every second counts. “You never know when you’re going to get that call, and there isn’t a lot of extra equipment available,” Hamrick said. “We need our equipment to be ready and able to perform.”
Even during the winter months, the generator has “instant oil pressure” when it’s fired up, he said. “If you walk into
our station all you will see in our maintenance room is AMSOIL products.” Growing His Own AMSOIL Business
Hamrick specializes in commercial accounts because his background is in heavy-duty diesel equipment. Name recognition of AMSOIL has improved in the years since he became a Dealer. “AMSOIL is easier to sell now
than even when I started as a Dealer,” Hamrick said. He credited AMSOIL INC. for its work building AMSOIL brand recognition in numerous markets. His experience with the products also helps him with other fleet managers as he tells them his first-hand experience of AMSOIL cost savings, equipment performance and longevity. “It’s all about saving money and extending the life of the equipment,” Hamrick said.

Share
Posted on November 20, 2011 by , 2 comments

Amsoil DOMINATOR – Synthetic 2-Cycle Racing Oil

 

Amsoil Dominator

Amsoil Dominator

Amsoil DOMINATOR®, an AMSOIL exclusive formulation, lubricates and protects high-performance two-cycle motors, both on and off the track. High-performance motors, particularly those that are modified, operate hotter and at higher RPM than recreational motors, and they need good oil for peak performance. DOMINATOR is engineered for racing. It has the right fi lm strength and clean-burning properties for “on the edge” operation.

FREE Amsoil Catalog – no obligation, sent USPS to your home. Free pen and Amsoil sticker included.

Amsoil Dominator

Super Film Strength

High-performance two-cycle motors have high compression ratios, which significantly increases combustion chamber heat and crankshaft bearing . Hot combustion processes quickly burn off and evaporate light oils and cause rapid piston expansion, decreasing piston-to-cylinder wall clearances. This promotes piston scuffing and possible seizure, and increased pressure on crankshaft bearings promotes metal-to-metal contact, wear and pitting. High heat and pressures require tough oil with better fi lm strength and more lubricity.

Amsoil DOMINATOR, constructed with AMSOIL heavy synthetic oil, handles high heat better
than mineral oils and provides improved fi lm strength and lubricity. DOMINATOR
reduces friction and provides an extra measure of protection against piston scuffing
and crankshaft bearing wear.

Amsoil DominatorAmsoil Dominator

Clean Burning

High combustion processes require the proper additives and oils to control deposits. Amsoil DOMINATOR contains strong, high-temperature detergent additives and highly pure AMSOIL synthetic oil. It helps prevent deposits that cause ring sticking, plug fouling and exhaust port blocking. Amsoil DOMINATOR is an optimized product for severe service.

• Provides excellent fi lm strength for high-heat, high-RPM motors
• Reduces friction for maximum power
• Recommended for use with coated or non-coated racing pistons
• Suitable for use with exhaust power valves
• Recommended for use with high-octane racing gas
• Burns clean; helps prevent ring sticking and plug fouling
• Provides excellent protection at 50:1 pre-mix or in injection systems

Amsoil Dominator

WordPress Tags: Amsoil,DOMINATOR,Synthetic,Cycle,performance,High,strength,operation,Super,Film,compression,combustion,chamber,expansion,cylinder,seizure,mineral,friction,protection,Clean,temperature,port,product,Suitable,injection,ratios,systems,motors,crankshaft,piston,scuffi,metal

www.syntheticoilhq.com

Share
Posted on November 20, 2011 by , 5 comments

AMSOIL PRODUCTS PREPARE EQUIPMENT FOR TOUGH WINTER WEATHER

Amsoil – Free Amsoil Catalog

AMSOIL PRODUCTS PREPARE EQUIPMENT FOR TOUGH WINTER WEATHER

Free Amsoil Catalog shipped to you door.

The fall months are the time to place boats, motorcycles and lawn care equipment into storage and prepare snowmobiles, snowblowers and other vehicles for the coming winter.

Amsoil

AMSOIL products are formulated to provide maximum protection for engines and fuel systems during storage, while Amsoil synthetic motor oils’ low pour points provide superior cold-temperature protection and performance in two-and four-stroke winter equipment.

 

Fall Storage Protection

Gasoline can break down in as little as 60 days, causing varnish and gums that clog injectors, fuel lines and carburetors, leading to poor engine performance and starting problems. In many applications, draining the fuel system can be impractical, and doing so can expose the system to corrosion on the bare metal in the tank and fuel system and cause gasket and seal cracking.

AMSOIL Gasoline Stabilizer reduces the oxidation that occurs when fuel is store for extended periods, improving performance, extending equipment life and decreasing maintenance expenses.Amsoil
During storage, fluctuations in ambient temperatures can form condensation within the engine that can cause surface corrosion on cylinder liners, piston rings, anti-friction bearings and steel/iron contact surfaces on rotational seals. Long periods of storage can also dry out cylinders, often resulting in permanent damage when the equipment is dry-started in the spring.

AMSOIL Engine Fogging Oil offers superior film retention, providing long-term protection against corrosion and dry starts, extending engine life and reducing operating expenses. Its aerosol spray formulation offers easy and clean application, while reaching more components and offering complete distribution of the oil, something especially beneficial in applications with horizontal cylinder orientation, such as outboard motors.

Winter Four-Stroke Performance 

Conventional oils thicken in the cold, which can result in inadequate lubrication to critical engine parts at cold start-up, or even prevent the engine from starting.
AMSOIL Formula 4-Stroke Power Sports Synthetic Motor Oil provides serious protection and performance in four-stroke engines, including ATVs and snowmobiles. Its broad 0W-40 viscosity rating effectively protects in both hot and cold temperature extremes.
AMSOIL Formula 4-Stroke Synthetic Small Engine Oil provides exceptional protection in the severe-service conditions common in both gasoline-and diesel-fueled small engines including welders, skidsteers, compressors, snowblowers and more. It remains fluid at sub-zero temperatures for superior cold-weather protection.
Winter Two-Stroke Performance
AMSOIL DOMINATOR and INTERCEPTOR
Synthetic 2-cycle Oils provides exceptional performance in snowmobiles and other two-stroke equipment. Amsoil DOMINATOR is formulated with heavier base oils for “on the edge” operation, while also protecting pistons and bearings subjected to the rigors of extreme riding.
AMSOIL INTERCEPTOR is engineered specifically for power-sports applications and engines equipped with exhaust power valves. It contains the finest synthetic base oils and additives for exceptional cleanliness, while controlling exhaust valve sticking and providing outstanding overall lubrication.
Gasoline Additive
AMSOIL Quick shot SE is formulated to thoroughly clean varnish, gums and insoluble debris in two-and four-stroke gasoline-powered small engines and power sports equipment fuel systems, restoring peak performance. Amsoil Quickshot effectively addresses performance issues related to ethanol, water and dirty pump gas, while stabilizing fuel between uses and during short-term storage periods. Use Amsoil for fewer fuel related problems and better winter performance.

http://www.syntheticoilhq.com

 

Share
Posted on November 19, 2011 by , Reply

Harley Davidson Sued for overheating; Or use Amsoil :- Amsoil motorcycle oil.

Amsoil motorcycle oil reduces engine temperatures, and provides protection even in extreme conditions. Get a FREE Amsoil Catalog or view all motorcycle products  on one page.

Harley Davidson Sued

BUY NOW by calling 1-800-956-5695Amsoil motorcycle oil and mentioning referral number 313120

A Federal Court Judge has denied a Harley Davidson motion to dismiss Harley bikers’ claims for fraudulent and unfair business practices, violations of Consumers Legal Remedies Act (CLRA), and unjust enrichment. A class action lawsuit may now go forward against Harley Davidson alleging certain Harley motorcycle engines produce severe, and excessive heat causing burn injuries and clothing to catch on fire.
Valenica, CA (PRWEB) August 06, 2011

Harley Davidson Sued

Last week, a federal judge ruled that a class action lawsuit against Harley Davidson could go forward, siding with four bikers who claim their Harley Davidson motorcycles were defectively designed because their engines ran so hot as to pose a constant danger to riders of being burned and were therefore not fit for their intended use.

Harley Davidson Sued

The complaint alleges that since 1999, Twin Cam 88, 96, 103 and 110 cubic inch engines in Harley motorcycles produce severe, excessive heat causing clothing to catch on fire, burn injuries and the danger of burn injury to riders and passengers as well as overheating causing premature engine wear and in models manufactured after 2006, transmission failure. Although Harley Davidson asked the Eastern District of California court to throw out the claims under state law, the U.S. District Judge sided with the bikers.

Harley Davidson Sued  Harley Davidson Sued  Harley Davidson Sued

Greg Owen, a partner at Los Angeles personal injury attorneys Owen, Patterson & Owen and one of the lawyers representing the plaintiffs in this case, states, “Harley Davidson has known about this problem from the early 2000s and has the technology to fix it, but has chosen to sell tens of thousands of touring bikes here in California without disclosing this known defect. When Harley customers complain to Harley’s dealers after purchase, Harley’s response is that’s normal and it refuses to offer an effective fix to the problem.”

Owen believes the unsafe heat problem is due to Harley selling larger engines that cannot comply with the emission standards of many states, including California.

‘The fix is pretty simple,’ says Owen, “and Harley already has it – manufacture touring bikes with liquid cooled engines instead of air cooled engines. If Harley did that this serious design and safety defect would go away.”

The recent ruling allows the case to move forward, and Harley Davidson will now face Class Action Certification process at the end of the month. image

Amsoil motorcycle oil reduces engine temperatures, and provides protection even in extreme conditions. Get a FREE Amsoil Catalog or view all motorcycle products  on one page.

BUY NOW by calling 1-800-956-5695Harley Davidson Sued and mentioning referral number 313120

Four Sacramento-area riders are suing Harley-Davidson, saying their bikes get dangerously hot. One even says his pants caught fire while riding. Now a class action lawsuit has brought against the motorcycle maker.Read the local story here; http://sacramento.cbslocal.com/2011/06/23/call-kurtis-harley-davidson-lawsuit/

Share
Posted on September 9, 2011 by , Reply

Premium Protection for New and Rebuilt Engines – Amsoil assembly lube

Premium Protection for New and Rebuilt Engines

Amsoil assembly lube

FREE Amsoil Catalog, no obligation, 58 pages of good information sent via USPS

Amsoil assembly lube

Amsoil assembly lube

New AMSOIL Engine Assembly Lube (EAL) is formulated to cling to engine parts and provide exceptional wear protection while inhibiting rust and corrosion in newly built or rebuilt four-stroke engines. It is designed to dissolve in oil, helping eliminate oil port clogging and deposit formation, and represents a premium option for performance enthusiasts, engine builders and race teams. It also presents a perfect complement to AMSOIL Break-In Oil (BRK), Dominator® Racing Oil (RD20, RD30, RD50) and Z-ROD™ Motor Oil (ZRT, ZRF).

 

Clings Tenaciously to Parts
Because building an engine can take from a few days to many months, using an engine assembly lube that clings well to parts for extended periods is critical. AMSOIL Engine Assembly Lube is formulated with a high-viscosity base oil and a unique tackifier for long-lasting, tenacious cling.

Exceptional Wear Protection
During initial startup, engines operate momentarily with little-to-no oil pressure, placing camshaft lobes, lifters, rocker arms, bearings and other critical parts at high risk of wear and failure. In addition to inhibiting wear by clinging to parts, AMSOIL Engine Assembly Lube contains high levels of antiwear additives for further protection.

Inhibits Rust and Corrosion
An engine can sit in a garage partially assembled for long periods, allowing moisture and oxygen to form rust on exposed metal surfaces. Amsoil assembly lube contains rust and corrosion inhibitors that protect engine components during inactivity.

Dissolves in Oil
Grease-based assembly lubes can increase the risk of oil port clogging if the grease is not fully consumed at initial startup, potentially causing engine failure. AMSOIL Engine Assembly Lube is designed to dissolve in oil, helping oil ports remain clean, and helping to eliminate deposit formation under the valve covers and in the oil pan.

Easy and Precise Application
Amsoil assembly lube is packaged in convenient 4-oz. tubes, allowing for cleaner, more precise application compared to other products.

Amsoil assembly lube

APPLICATIONS
AMSOIL Engine Assembly Lube is recommended for any new or rebuilt four-stroke engine, including racing and performance engines, and should be applied to all areas of the engine susceptible to initial startup wear.

  • Tenaciously Clings to Parts
  • High in Anti-Wear Additives
  • Dissolves in Oil
  • Provides Rust & Corrosion Protection
  • Recommended for all Four-Stroke Engines, Including High-Performance and Racing Engines
Share
Posted on August 21, 2011 by , 1 comment
First « 12