Home » Posts tagged "series"

Ford Edge Cooling Fan Replacement–Part 2

Ford Edge cooling fan

Part 1 is here http://www.syntheticoilhq.com/blog/ford-edge-cooling-fan-replacementpart-1video/

This is the project to replace the cooling fan on our 2007 Ford Edge myself, to save part of the $900.00 that Ford wanted. It’s pretty labor intensive, but nothing really unusual.

Ford Edge cooling fan

I think there will be 4 parts to this series, still putting the video together. In part two, we demonstrate the following steps;

  1. Start removing wiring harness from the top of the radiator.
  2. Removing the panel across the top of the radiator.
  3. Moving the hood prop rod.
  4. Removing fender well/ wheel well screws.
  5. Removing splash panel from the bottom of front bumper.

 

Get a FREE Amsoil catalog.

Amsoil preferred customer

WordPress Tags: Ford,Edge,Replacement,Part,series,steps,Start,radiator,panel,bottom

Share

Grand National Cross Country GNCC Racing Announces 2012 Schedule

GNCC Racing

GNCC Racing

GNCC Racing

 

Morgantown, W. Va. (December 23, 2011) – Just in time for the holidays, Racer Productions is pleased to announce the locations for the 2012 Can-Am Grand National Cross Country Series. America’s largest off-road racing series will once again kick off its 13-round schedule at Westgate River Ranch Resort in River Ranch, Fla., coinciding with Daytona Bike Week March 10-13.

GNCC Racing

 

Free Amsoil Catalog

GNCC Racing

GNCC Racing

Highlighting the 2012 calendar is the addition of three all-new GNCC Racing venues in Indiana, Kentucky and West Virginia-giving racers the opportunity to compete on fresh soil next season.

“We’re really excited to introduce three new venues to the GNCC Racing schedule next year,” said GNCC Trail Boss, Jeff Russell. “Since the Loretta’s GNCC, we’ve been traveling all over to find new GNCC Racing venues for our GNCC Racers and I think the fresh trail and new scenery will add a whole new level of excitement for everyone.”

The series returns to many GNCC favorites in 2012, including Snowshoe Resort, Unadilla MX, Ironman and Loretta Lynn’s, which will once again serve as the season finale.

A special weekend GNCC Racing format will take place at Loretta Lynn Ranch in November, in order to accommodate the 2012 ISDE and National Enduro schedules. Motorcycles will compete throughout the day on Saturday and ATV racing will follow on Sunday-atypical from the other 12 rounds of racing where ATVs compete on Saturday and motorcycles on Sunday.

What is GNCC?

Read the entire history of the event at www.gnccracing.com. Here are some excerpts;

How GNCC Racing Works

Six races are held each weekend. Each race contains several classes, with each class separated into separate starting-line rows that begin one minute apart. On ATV day, Youth riders aged 6 – 15 race for one hour starting at 8 a.m. A two-hour race for the Women, Utility, Super Senior and Novice classes starts at 10 a.m., and then the Pro, Pro Am, A and B riders race at 1 p.m. On Bike days, Youth riders aged 7 – 15 race for 90 minutes at 8 a.m.; Women, Super Senior and Novice riders race for two hours at 10 a.m.; and the Pro, A and B riders race for three hours starting at 1 p.m.

Each GNCC Racing class is scored separately using a computerized transponder scoring.

GNCC courses usually run between 10 and 12 miles long for adult classes and 3-5 miles for youth.

Over 1500 GNCC Racing riders will compete during a GNCC weekend, and they hail from all 50 states, as well as Europe, Asia and Australia.

The top pro racers make a lucrative living racing the series thanks to prize money and sponsorship endorsements. Racing is a full-time job for a GNCC championship contender.

 

About GNCC Racing

The AMA/ATVA-sanctioned Grand National Cross Country series is America’s premier off-road racing series. The 13-round race series stretches through the eastern US, starting with the season-opener in Florida in March and concluding with the season-finale in Indiana in October. The GNCC series is produced exclusively by Racer Productions, a Morgantown, West Virginia-based racing production company with over 30 years of experience in the industry. Cross-country racing is one of the most physically demanding sports in the world. The riders must navigate rugged terrain such as woods, mud, dirt, rocks and jumps for nearly three hours, while racing against the best talent in the world.

The GNCC Championship has drawn interest internationally, as riders from Europe, Africa, Australia and New Zealand compete regularly, usually backed by massive factory teams with an array of technicians at their disposal. Upwards of 1500 racers compete at each GNCC round on custom-built high-performance motorcycles and ATVs. The race action draws several thousand fans each weekend as well as a loyal following t

Through the series television show on the Versus Network here in the US, on the Fox Australia network in Australia, and on Motors TV in over 55 different European countries, as well as media coverage in off-road racing publications around the world. The growth of the series makes GNCC big business, but the core value of the series remains: easy-access, family-friendly, low-pressure racing.

Amsoil Sponsored Ironman GNCC Race

GNCC Schedule

Round Race Dates Event Location
Rd. 1 March 10-13 Westgate River Ranch River Ranch, FL
Rd. 2 March 17-18 The General Aonia Pass, GA
Rd. 3 Mar 31-Apr 1 Steele Creek Morganton, NC
Rd. 4 April 14-15 Big Buck Union, SC
Rd. 5 April 28-29 The Mammoth Park City, KY
Rd. 6 May 12-13 Indy 100 Springville, IN
Rd. 7 May 26-27 Buckwheat Masontown, WV
Rd. 8 June 23-24 Snowshoe Snowshoe, WV
Rd. 9 July 7-8 John Penton Millfield, OH
Rd. 10 Sep 15-16 Unadilla New Berlin, NY
Rd. 11 Oct 6-7 Powerline Park St. Clairsville, OH
Rd. 12 Oct 20-21 Ironman Crawfordsville, IN
Rd. 13 Nov 3-4 Loretta Lynn’s Hurricane Mills, TN

 GNCC Racing

GNCC Racing

Free Amsoil Catalog

synthetic motorcycle oil

WordPress Tags: Grand,National,Cross,Country,GNCC,Schedule,Morgantown,December,Racer,Series,America,Westgate,River,Ranch,Resort,Daytona,Bike,Week,March,calendar,addition,Indiana,Kentucky,West,Virginia,Trail,Boss,Jeff,Russell,Loretta,Racers,scenery,excitement,Snowshoe,Unadilla,Ironman,Lynn,finale,November,ISDE,Enduro,Motorcycles,ATVs,Read,history,event,Here,Works,classes,Youth,Women,Super,Senior,Novice,Over,Europe,Asia,Australia,money,sponsorship,championship,contender,About,ATVA,opener,Florida,October,production,industry,sports,world,terrain,woods,dirt,talent,Africa,Zealand,factory,disposal,Upwards,custom,performance,action,Through,television,Versus,Network,Motors,European,coverage,growth,Round,Race,Location,General,Aonia,Pass,Steele,Creek,Morganton,April,Buck,Union,Mammoth,Park,Indy,Springville,Buckwheat,Masontown,June,John,Penton,Millfield,Berlin,Powerline,Clairsville,Crawfordsville,Hurricane,Productions,locations,venues,excerpts,riders,endorsements,teams,publications,three,weekend,hour,hours,miles

Share

TORC Announces 2012 TORC Racing Schedule

TORC racing Announces 2012 Schedule

December 24, 2011

Use this link for Free Amsoil catalog

TRAXXAS TORC - The Off-Road Championship Series

TORC racing

After a successful 2011 campaign that brought off-road racing to three new venues, the Traxxas TORC Series presented by AMSOIL has set the course for 2012.

TORC racing

The seven weekend, 14-race season will start where it ended in 2011.  A purpose-built track at Cycle Ranch in Floresville, Texas will host the first two rounds of racing April 28-29.  Just 30-minutes from downtown San Antonio, Cycle Ranch offered up one of the most technical race tracks on the circuit this past season.

TORC racing

A return to Red Bud MX in Buchanan, Mich. is on tap for the Memorial Day holiday weekend, May 26-27.  Despite heavy rains and knee-deep mud, the Red Bud faithful saw some of the most extreme off-road racing this year as the TORC series started at the famed motocross facility.

Big market, NASCAR venues in Chicago and Charlotte are mid-season highlights for the premier off-road, short course series.  TORC invades NASCAR country July 13-14 at the Charlotte Motor Speedway. it will be a quick turnaround for the teams less than one week later in Joliet, Ill. at Chicagoland Speedway for a Thursday-Friday event.

Historical venues Crandon International Raceway and Bark River International Raceway round out the new schedule.  The series returns to its traditional ending in Crandon, Wis. on Labor Day weekend.  The final race of the year will be the AMSOIL Cup on Sunday, September 2.

TORC racing

TORC racing

 

WordPress Tags: TORC,Schedule,road,Traxxas,Series,AMSOIL,purpose,Cycle,Ranch,Floresville,Texas,host,April,Just,downtown,Antonio,circuit,Buchanan,Mich,Memorial,Despite,knee,NASCAR,Chicago,Charlotte,highlights,Motor,Speedway,Joliet,Chicagoland,event,Historical,Crandon,International,Raceway,Bark,River,Labor,September,venues,teams,weekend

TORC racing

Share

Enter to Win AMSOIL Winter Prize Pack : Amsoil prize pack.

Get a FREE Amsoil catalog!

 Amsoil prize pack

The 2011-12 AMSOIL Championship Snocross Series is underway and AMSOIL is celebrating with a giveaway for the fans.

AMSOIL is giving away weekly prizes throughout the ACSS season, including AMSOIL INTERCEPTOR® 2-Cycle Oil and AMSOIL beanies. At the end of the season, one lucky fan will receive a premium AMSOIL Klim jacket and a pair of AMSOIL Klim gloves.

Amsoil prize pack

Fill out the form HERE for your chance to win.

image

 

 

 

 

 

 

 

 

 

 

 

 

 

WordPress Tags:

Enter,AMSOIL,Winter,Prize,Pack,Championship,Snocross,Series,giveaway,ACSS,INTERCEPTOR,Cycle,Klim,jacket,Fill,HERE

Share

Synthetic Compressor Oil

Synthetic Compressor Oil – eliminate maintenance on compressors

Free Amsoil Catalog

synthetic compressor oil Buy Amsoil Synthetic Compressor Oil now!

Synthetic compressor oil can eliminate one maintenance chore in your shop. Most folks never change the compressor fluid in shop air compressors. These are often neglected, but critical tools in a shop. You can eliminate the need to maintain and monitor oil changes in compressors by installing synthetic compressor oil. AMSOIL PC Series Synthetic Compressor Oil is a long-life, premium compressor lubricant based on novel, proprietary technology. It incorporates the highest quality, thermally stable PAO synthetics fortified with premium non-detergent, ashless additives for maximum protection at high temperatures and pressures. It lasts up to eight times longer than petroleum oils, effectively reducing maintenance and waste oil disposal costs.

Improves Compressor Efficiency
AMSOIL PC Series Synthetic Compressor Oil has low friction properties and resists viscosity increase from oxidation. It helps improve operating efficiency and saves money on electrical energy consumption.

Synthetic Compressor Oil

synthetic compressor oilControls Foam and Reduces Wear
AMSOIL PC Series Synthetic Compressor Oil contains anti-foam additives and, unlike some other compressor oils, is anti-wear fortified. Good foam control reduces heat, oxidation and wear. High contact regions are protected against wear for increased compressor life and efficiency.

Resists Water Contamination
Water from condensation builds up in compressors and can cause unwanted oil/water emulsions, environmental discharge hazards and rust. AMSOIL PC Series Synthetic Compressor Oil is hydrolytically stable. It resists acid formation, readily separates from water and is anti-rust fortified. Water can be easily drained for simplified environmental discharge and increased oil life.

Resists Heat and Oxidation
AMSOIL PC Series Oil combines the inherent stability of premium synthetic base oils with specialized anti-oxidant additives to resist varnish, carbon and acid formation. It is formulated to protect compressors better and last longer in service than petroleum oils, especially during hot operating conditions.

Synthetic Compressor Oil

Safety Advantage
AMSOIL PC Series Oil is an ashless, high-flash-point formulation with very low carbon-forming tendencies that minimizes the incidence of ignition-promoting “hot spots.” While PC Series Oil can provide improved fire safety, it cannot be considered non-flammable.

Application Recommendation
AMSOIL PC Series Oil in the appropriate viscosity is recommended for use in single and multistage rotary screw, vane, centrifugal and reciprocating compressor crankcases and cylinders, vacuum pumps and other applications such as gears, bearings, blowers, pumps and handheld pneumatic tools. In compressor applications, drain intervals of 8,000 hours or more can be expected under normal operation. Drain intervals are subject to operating conditions and maintenance practices. Monitoring by oil analysis is recommended. For best performance when converting to AMSOIL PC Series Synthetic Compressor Oil, it is recommended the compressor be drained of the old fluid prior to the installation of PC Series Oil. If carbon deposits are present on the internal components, it is recommended they be removed following the compressor manufacturer recommendations.

How to change the air compressor oil

Some air compressors are oil less; they do NOT use oil. If you have one of those, you don’t have to change oil since there isn’t any. Most large shop style tower compressors ARE oil lubricated.

  • Do NOT use regular automotive oil; this is against almost all manufacturer recommendations. Read your manual.
  • Determine the weight and spec recommended.
  • There will usually be a drain and a filler/dipstick.
  • Drain the oil, and put the plug back in.
  • Fill the oil to the level recommended on the dipstick, or on the oil sight glass.
  • Most manufacturers (including CH) recommend changing once after the first hour of use.
  • Synthetic Compressor Oil

    Synthetic Compressor Oil

Here is a detail of how to read the oil sight glass;

Synthetic Compressor Oil

Synthetic Compressor Oil

 

COMPATIBILITY
AMSOIL PC Series Synthetic Compressor Oil is compatible with petroleum oils and most synthetic oils, seals, paints and materials, including the following:

Gases:

• Nitrogen • Hydrogen • Helium • Carbon Monoxide
• Carbon Dioxide (dry) • Ethylene • Methane
• Propane • Butane • Propylene • Butylenes
• Natural Gas • Benzene • Butadiene
• Furnace (crack gas) • Hydrogen Sulfide (dry)
• Synthetic Gas • Sulfur Dioxide

Paints:

• Epoxy • Oil Resistant Alkyd • Acrylic Enamel

Plastics:

• Acetal (Delrin) • ABS • Phenolic • Polyamide-imide
• Polyamide (Nylon)
• Polycarbonate (metal covered only)
• Polyester • Polyetherimide (Nylon) • Polyimide
• Polyphenylene oxide • Polystyrene • Polysulfone
• PTFE (Teflon) • Terephthalate.

Elastomers:

• Fluoroelastomer (Viton) • Nitrile (Buna N)
• Polyacrylate • TFE/P • Poly Urethane.

Note: Not recommended for “breathing air” or refrigeration compressors. Not recommended for use with polycarbonate plastic that is not metal covered, PVC plastic and butyl, ethylene-propylene or SBR rubber. PC Series Synthetic Compressor Oils are Not Compatible with polyalkylene glycol or silicone oils.

Synthetic PC Series Compressor Oils SAE 10W
(PCH)
SAE 20
(PCI)
SAE 30
(PCJ)
SAE 40
(PCK)
SAE 50
(PCL)
ISO VG – ASTM D-2422 32 46 68 100 150
VK 100°C – ASTM D-445 6.2 7.3 10.9 13.6 17.9
VK 40°C – ASTM D-445 33.1 42.4 67.4 100.5 148.4
Viscosity Index – ASTM D-2270 137 137 153 136 134
SPGR – ASTM D-1298 0.8393 0.8408 0.8468 0.8550 0.8602
Density – ASTM D-1298 6.989 7.001 7.051 7.119 7.163
Flash Point °C (°F) – ASTM D-92 264 (507) 254 (489) 253 (487) 264 (507) 254 (489)
Fire Point °C (°F) – ASTM D-92 278 (532) 280 (536) 280 (536) 276 (529) 274 (525)
Pour Point °C (°F) – ASTM D-97 -53 (-63) -48 (-54) -40 (-40) -45 (-49) -42 (-44)
Four-Ball Wear Test – ASTM D-4172 (40 kg, 1200 rpm, 75° C, 60 min.) 0.45 0.45 0.45 0.45 0.45
Copper Strip Corrosion Test – ASTM D-130 1A 1A 1A 1A 1A
Rust Test – ASTM D665 A & B Fresh Water and Synthetic Sea Water Pass Pass Pass Pass Pass
Foam, ml (ASTM D-892) Sequence I, II, III Test End – and After 10 minutes settling 0/0/0 0/0/0 0/0/0 0/0/0 0/0/0
Demulsibility ASTM D-1401 [oil/water/cuff (minutes)] 40/40/0 (5) 40/40/0 (5) 40/40/0 (5) 40/40/0 (5) 40/40/0 (5)

 

WordPress Tags: Synthetic,Compressor,tools,shop,AMSOIL,Series,life,lubricant,technology,protection,times,petroleum,maintenance,disposal,temperatures

Synthetic PC Series Compressor Oils SAE 10W
(PCH)
SAE 20
(PCI)
SAE 30
(PCJ)
SAE 40
(PCK)
SAE 50
(PCL)
ISO VG – ASTM D-2422 32 46 68 100 150
VK 100°C – ASTM D-445 6.2 7.3 10.9 13.6 17.9
VK 40°C – ASTM D-445 33.1 42.4 67.4 100.5 148.4
Viscosity Index – ASTM D-2270 137 137 153 136 134
SPGR – ASTM D-1298 0.8393 0.8408 0.8468 0.8550 0.8602
Density – ASTM D-1298 6.989 7.001 7.051 7.119 7.163
Flash Point °C (°F) – ASTM D-92 264 (507) 254 (489) 253 (487) 264 (507) 254 (489)
Fire Point °C (°F) – ASTM D-92 278 (532) 280 (536) 280 (536) 276 (529) 274 (525)
Pour Point °C (°F) – ASTM D-97 -53 (-63) -48 (-54) -40 (-40) -45 (-49) -42 (-44)
Four-Ball Wear Test – ASTM D-4172 (40 kg, 1200 rpm, 75° C, 60 min.) 0.45 0.45 0.45 0.45 0.45
Copper Strip Corrosion Test – ASTM D-130 1A 1A 1A 1A 1A
Rust Test – ASTM D665 A & B Fresh Water and Synthetic Sea Water Pass Pass Pass Pass Pass
Foam, ml (ASTM D-892) Sequence I, II, III Test End – and After 10 minutes settling 0/0/0 0/0/0 0/0/0 0/0/0 0/0/0
Demulsibility ASTM D-1401 [oil/water/cuff (minutes)] 40/40/0 (5) 40/40/0 (5) 40/40/0 (5) 40/40/0 (5) 40/40/0 (5)

Share