Home » Posts tagged "sludge"

Stored Equipment Needs Protection – Engine Fogging Oil

FREE Amsoil Catalog

Engine Fogging Oil

As fall turns to winter, customers in many parts of the country begin placing summer work and recreational equipment; including motorcycles, boats, lawnmowers, construction and farm equipment; into winter storage. Ensure customers’ stored equipment is protected throughout the winter season and in top condition when it is put back into service in the spring. Engine fogging oil helps protect your equipment.

AMSOIL Engine Fogging Oil

amsoil engine fogging oil

amsoil engine fogging oil

Fluctuations in ambient temperatures can cause water vapor to form condensate within stored engines. When this condensate comes into direct contact with steel
and iron components, it forms surface corrosion on cylinder liners, piston rings, anti-friction bearings and steel/
iron contact surfaces on rotational seals. Long periods of storage can also dry out cylinders, often resulting in permanent damage when the equipment is taken out
of storage and dry-started. Most two- and four-stroke motor oils are formulated to have an affinity to engine component surfaces, acting as a barrier that keeps condensate from contacting engine components and forming corrosion.
However, the effectiveness of motor oil in this area diminishes with time.

 

AMSOIL Engine Fogging Oil (FOG)

offers superior film retention, providing long-term
protection against corrosion and dry starts, etending engine life and reducing operating expenses. Amsoil engine fogging oil is an aerosol spray formulation offers easy and clean application, while
reaching more components and offering complete distribution of the oil, something especially beneficial in applications with horizontal cylinder orientation, such as outboard
motors. Consult equipment owner’s manual for application directions.

AMSOIL Gasoline Stabilizer

Gasoline is not formulated for long-term storage and can start to degrade in as little as 60 days, leading to varnish and sludge deposits that clog injectors, fuel lines and carburetors; stick oats; and cause poor engine performance, starting problems, increased maintenance expenses and decreased equipment life. It is difficult to drain all of the fuel from equipment before storage, and doing so would expose the to other problems, including the formation
of rust and corrosion on the bare metal in the tank and fuel system and the drying and cracking of gaskets and seals.
Some fuels are pre-treated with oxidation inhibitors that allow them to be stored for short periods without forming excessive deposits, while other fuels have no inhibitors at all. AMSOIL Gasoline Stabilizer (AST) reduces
the oxidation that occurs when fuel is stored for extended periods, improving performance, extending equipment life
and decreasing maintenance expenses.

www.syntheticoilhq.com

Technorati Tags: ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

Share
Posted on December 12, 2011 by , 3 comments

Family Handyman Magazine Gets it Right on Synthetic Oil Myths – almost : Amsoil Engine Flush.

Amsoil Engine Flush

Family Handyman magazine

Family Handyman Magazine had a short tip on the 4 Big Synthetic Oil Myths. www.familyhandyman.com

The big four myths listed were;

  1. You have to flush the engine before you can run synthetic oil in it. FALSE. You should NEVER flush your engine. All carmakers warn against this practice. (editorial comment; this is the one reaction we disagree with)
  2. Synthetic oil causes leaks. FALSE. This was true 25 years ago. Not anymore. Current formulations contain seal conditioners to prevent leaks.
  3. Once you switch to synthetic, you can’t go back to regular oil. FALSE. No truth whatsoever to this one.
  4. Since synthetic oil flows better when cold, I can ignore the manufacturer’s recommendations for 5W- 20 and use 10W-30. FALSE. Heavier weight oil reduces fuel efficiency and can mess up valve timing mechanisms. Stick with the manufacturer’s oil weight recommendations.

Amsoil Engine Flush

In general, Family Handyman gets it straight on these tips. These have each been a long standing myth so it’s good to get a major magazine to clear the air. We agree with their reaction to tips 2,3, and 4.

Engine Flush

Amsoil has sold an engine flush product for years. In many cases, it’s not needed. However, in certain cases it’s a proper product to use to transition a car to synthetic oil. It’s been used in thousands of vehicles by thousands of Amsoil customers with no issues.

Amsoil Engine Flush

Amsoil Engine Flush AMSOIL Engine and Transmission Flush (FLSH) helps restore fuel economy, increase operating efficiency and reduce emissions in gasoline and diesel engines, and automatic transmissions. Its potent, detergent-based formula cleans sludge and deposit build-up, promoting lower operating temperatures and reduced oil consumption. AMSOIL Engine and Transmission Flush is safe on parts and can be easily disposed of with waste oil. Amsoil Engine Flush

Restores Vehicles to Like-New
New engines and transmissions run more efficiently, but over time they gather harmful deposits that cause power and performance loss. Stop-and-go driving, prolonged idling, short trips that do not allow the engine to reach full operating temperature, towing, the ingestion of airborne dirt, fuel dilution, water condensation and oxidized oil all can promote sludge build-up in motor oil and transmission fluid. As it settles, sludge clogs narrow oil passages, restricting oil flow to vital parts, especially the upper valve train area. Amsoil Engine Flush

In transmissions, deposits can form on clutch plates, causing hesitation and erratic shifting. Ultimately clutch glazing can set in, reducing the life of the transmission. Deposits in engines and transmissions can accelerate wear, causing power loss and increased fuel consumption. Amsoil Engine Flush

• Cleans engines and transmissions for improved efficiency, fuel economy and lower emissions
• Prolongs equipment life
• Detergent-based formula more environmentally friendly
• Compatible with seals and gaskets
• One-treatment results
• Easily disposed of with waste oil

Installing new oil or transmission fluid into a dirty vehicle may not be enough to remove deposits and increase efficiency. The detergents and dispersants in some lubricants may not be able to handle leftover sludge and deposits, and the new lubricant soon becomes unfit for service, accelerating the formation of even more harmful deposits. Amsoil Engine Flush

AMSOIL Engine and Transmission Flush Benefits
Unlike many flush products, AMSOIL Engine and Transmission Flush features a multi-use formulation that dissolves and disperses sludge, varnish and deposits in both engines and automatic transmissions. Due to its detergent-based formulation, used AMSOIL FLSH can be easily disposed of with waste oil, making it more user-friendly. Its advanced formula of light base oil technology, powerful detergents and dispersants provides safe cleaning action. AMSOIL FLSH is compatible with both petroleum and synthetic oils, preparing poorly maintained equipment for installation of new oil. It represents the first step toward restoring neglected equipment to top-notch performance. AMSOIL Engine and Transmission Flush provides the following benefits in only one treatment:

Gasoline and Diesel Engines

• Helps loosen sticky valves and rings, minimizing blow-by and reducing emissions
• Helps quiet lifter noise
• Promotes lower operating temperatures through sludge removal
• Easy disposal

Automatic Transmissions

• Cleans deposits in oil cooler and ports
• Helps unclog fluid passages
• Cleans deposits and varnish from clutch plates, helping improve efficiency
• Promotes smoother operation and transmission life through reduced shift delay

Applications
AMSOIL Engine and Transmission Flush is recommended for diesel and gasoline engines, and automatic transmissions. It is not recommended for CVT transmissions or differentials.

Directions for Use
Though it works in one treatment, AMSOIL Engine and Transmission Flush is safe enough to be used at every oil change. If using a flushing machine, follow the manufacturer’s recommendation. Otherwise, use the following guidelines:

Engine: Add 16 oz. bottle of AMSOIL Engine and Transmission Flush to engine oil fill port. Idle the engine for 10-15 minutes, then immediately drain the oil. Ensure enough time for the system to completely
drain. Remove and replace the engine oil filter. Refill engine with new engine oil in the viscosity grade recommended by the manufacturer.

Transmission: Engage emergency brake. Add 16 oz. bottle of AMSOIL Engine Flush to transmission oil fill port. Idle for 10-15 minutes; shift through drive and reverse. Do NOT place vehicle under heavy load. Drain entire transmission and torque converter of fluid. FILTER MUST BE CHANGED prior to refilling with new transmission fluid.

NOTE: It is not recommended to flush transmissions that do not have a removable pan or access to the transmission filter.

 

Amsoil Engine Flush

Amsoil Engine Flush

 

 

 

 

 

 

 

(above) Automatic transmission clutch plates pre-cleanup. Varnish and glazing is heavy on some of the plates.

Amsoil Engine Flush

Amsoil Engine Flush

 

 

 

 

 

 

 

(above) Automatic transmission clutch plates after cleanup with AMSOIL Engine Flush reveal lighter glazing and varnish.

Amsoil Engine Flush

Amsoil Engine Flush

 

 

 

 

 

 

 

(above) Cylinder head pre-cleanup. Note the sludge deposits on and around the valve springs and push rod openings.

Amsoil Engine Flush

Amsoil Engine Flush

 

 

 

 

 

 

 

(above) Cylinder head after cleanup with AMSOIL Engine Flush. The valve springs and push rod openings are noticeably cleaner, with fewer sludge deposits. The manufacturer’s stamping is more easily seen.

http://www.syntheticoilhq.com

Diesel fuel treatment

WordPress Tags: Handyman,Magazine,Synthetic,Myths,engine,FALSE,editorial,reaction,Current,Once,truth,manufacturer,Heavier,efficiency,valve,Stick,tips,myth,Flush,Amsoil,product,cases,transition,customers,Transmission,FLSH,gasoline,formula,sludge,consumption,performance,Stop,temperature,ingestion,dirt,dilution,condensation,area,plates,hesitation,life,equipment,Detergent,Compatible,treatment,results,vehicle,lubricant,formation,Benefits,products,features,user,technology,action,petroleum,installation,Diesel,Engines,rings,lifter,noise,removal,Easy,disposal,Automatic,operation,Directions,Though,machine,recommendation,Otherwise,guidelines,bottle,port,Idle,Ensure,system,Remove,Refill,Engage,emergency,Drain,FILTER,NOTE,cleanup,Varnish,Cylinder,recommendations,mechanisms,vehicles,emissions,transmissions,temperatures,ports,differentials,thousands,detergents,dispersants,formulation

Share
Posted on December 9, 2011 by , 2 comments

Top Truck Challenge Day 1: Tow Test, Frame Twister And Mud Pit

All Amsoil 4×4 and offroad truck products on one page

Top Truck Challenge Day 1: Tow Test, Frame Twister & Mud Pit

June 08, 2011

We just got a report from AMSOIL Powersports Technical Product Manager Len Groom, who is live on the scene of the 2011 Top Truck Challenge in Hollister Hills, CA. The challenge kicked off Tuesday with the competitors being introduced to the 2011 event by the Tow Test, Mud Pit and Frame Twister. While the Tow Test claimed only a broken driveshaft on a buggy, the Frame Twister lived up to its name and kept most competitors from even finishing.  The Frame Twister event is a brutal proving ground filled with holes, rocks and logs aimed at taking out these monstrous trucks with little effort. Len Groom reported that is was the most demanding Frame Twister yet and summed up what has been seen so far in one word: Tough.

After numerous extractions and broken parts in the Frame Twister, the challenge moved on to the Mud Pit event. These rigs don’t typically do well in this type of sludge but competitor Mike Keller hit the mud flying and skimmed along the top, making it look easy. We are now in Day 2 of the 2011 Top Truck Challenge, which will see the competitors battle the Obstacle Course, Hill Climb and Mini Rubicon. Judging by the photos we have received thus far, things are just getting good.

Who will emerge victorious in the 2011 Top Truck Challenge? Be sure to check back for more photos, updates and quotes directly from the competitors right in the thick of it.    

Share
Posted on June 13, 2011 by , Reply